CFM Frodo Posted February 5, 2021 CFM Report Posted February 5, 2021 (edited) This how I cover a whip handle, You need, A a piece of 3/4'' pvc what ever length you need A 3/4pvc cap, for the other end, i use a 1'' coupling, a 3/4 coupling You will need 25 lengths of lace 6'' longer than the pipe 1 piece of lace that will spiral around the entire length of the pipe For the other end saw the 3/4 coupling in half. inside the 1'' coupling is a small pipe stop ridge, dermal that ridge gone the 3/4 coupling should slide into the 1'' coupling push it in half way glueed cover the 1'' coupling with a braid slide it onto the handle that you made, the coupling should over hang the pipe just enough to dress up the edge epoxy the whip into the 3/4 pipe Edited February 5, 2021 by Frodo Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles D.C.F.M
Members mike02130 Posted February 5, 2021 Members Report Posted February 5, 2021 Fill it with lead and call it a sap. Quote @mike02130 Instagram
CFM Frodo Posted May 8, 2024 Author CFM Report Posted May 8, 2024 I found my 10 year old old bull whip and maybe this will shed some light on how to make a whip handle visually This is a paracord whip , it laces up the same as leather Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles D.C.F.M
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.