mike1967 Report post Posted March 3, 2021 I have a new Blanchard plough gauge. I have sharpened the blade & it seems to cut fine when not attached to gauge, but when in the gauge it seems to cause the leather cut to increase in width. This cause the plough gauge to bind up. Mike Quote Share this post Link to post Share on other sites
chuck123wapati Report post Posted March 4, 2021 Hope this helps https://favoredleather.com/leather-plough-gauge/ Quote Share this post Link to post Share on other sites
mike1967 Report post Posted March 4, 2021 Thanks Chuck. My knife on my just seems like the convex edge is to steep on the fence side causing it to bind against the fence. Quote Share this post Link to post Share on other sites
