Jump to content

Recommended Posts

Posted
15 minutes ago, brushew93 said:

Hopefully they will be able to diagnose the issue. I will post their suggestion and the result here.

Yes, please do as it may help others down the road that may experience a similar problem in the future.

kgg

Juki DNU - 1541S, Juki DU - 1181N, Singer 29K - 71(1949), Chinese Patcher (Tinkers Delight), Warlock TSC-441, Techsew 2750 Pro, Consew DCS-S4 Skiver

  • Members
Posted

@kgg, @Uwe - This morning when I went to take a video for Techsew, I discovered a brand new noise the machine is making. This was NOT happening yesterday, and no additional adjustments were made! The noise occurs just as the needle reaches its highest point. It does NOT occur at all if the presser feet are lifted. 

 

 

Posted

That sound and that ever so light jiggle of the main pressor foot remains me of when I had to shim the lifter arm that connects the chain to the foot pedal out from the sewing machines body by about a 1.5 mm at the pivot bolt in my clone.

kgg

Juki DNU - 1541S, Juki DU - 1181N, Singer 29K - 71(1949), Chinese Patcher (Tinkers Delight), Warlock TSC-441, Techsew 2750 Pro, Consew DCS-S4 Skiver

  • Members
Posted

Have you checked is the rear side of inner foot is touching the outer foot in some way?

~ Keep "OLD CAST IRON" alive - it´s worth it ~

Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2

  • Members
Posted

@Constabulary Techsew called me and had me adjust my stitch length dial. I ended up loosening the middle screw, then holding down the reverse lever, and setting the dial to 1. That fixed things for me. Doesn't make a lick of sense to me, but it worked so I'm not complaining!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...