kgg Posted October 11, 2021 Report Posted October 11, 2021 I have a couple of Singer 29k-71's one a 1949 with the case iron cobber base and the another from Landis a 1998 version that has a 52 to 1 helper geared motor. I did a short video using the 1998 Singer 29k-71 and plan on doing another of the 1949. Hopefully, someone may find it helpful if they are planning on purchasing a used machine or even a new clone of the Singer 29K. It is very easy to say a machine should sound / operate this way or that but I hope the video will provide a good base line. These machines were flushed and oiled using my redneck oil. The link to the video is https://odysee.com/@SingerSewing:0/singer:a Comments always welcomed. kgg Quote
MtlBiker Posted October 12, 2021 Report Posted October 12, 2021 Looks like you did a lovely job in cleaning up and adjusting that machine! What are your plans with the machine? Will you be keeping it for some specific task or selling it? Quote
kgg Posted October 12, 2021 Author Report Posted October 12, 2021 1 hour ago, MtlBiker said: Looks like you did a lovely job in cleaning up and adjusting that machine! Thank you. 1 hour ago, MtlBiker said: What are your plans with the machine? This machine is on a out-the-door journey as I really don't need a second Singer 29K-71. kgg Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.