Members MCFromCanada Posted November 3, 2021 Members Report Posted November 3, 2021 I am setting up a new 1508 out of the box. I can’t find any reference for the position to fasten the oil bath to the table, and what that is actually for. The main oil catch pan is in place already. I know it sits under the hook assembly approximately. Is it just meant as a splash guard? Or does it actually help oil the hook from down below? My manual shows that I fill it with oil just above the level of the provided sponge, so that makes me think that it should be fastened high up so the bottom of the assembly is sitting in the oil? If anyone has any knowledge on this, please let me know. I can provide pictures if need be. Thanks! Quote
Members DrmCa Posted November 3, 2021 Members Report Posted November 3, 2021 (edited) See if this thread helps: You can d/l a service manual for that machine from http://www.dixiesewing.com/JUKI SERVICE.htm Edited November 3, 2021 by DrmCa add URL Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.