Members ddiuni Posted January 27, 2022 Members Report Posted January 27, 2022 I need to remove the looper of the sewing machine 91k5, but I can't. If anyone knows a way to remove it, please let me know. As you can see in the picture, the looper is plugged into the top. I need to take this looper out, but it won't fall out. It seems to be about 5mm in. Quote
Members DrmCa Posted January 27, 2022 Members Report Posted January 27, 2022 Put the looper in a vise, use heat on the rod, twist and pull. Quote Machines: Mitsubishi DB-130 single needle, Kansai Special RX-9803/UTC coverstitch, Union Special 56300F chainstitch, Pfaff 335-17 cylinder arm walking foot, Bonis Type A fur machine, Huji 43-6 patcher, Singer 99 hand cranked, Juki DDL-553 single needle (for sale)
Members ddiuni Posted February 13, 2022 Author Members Report Posted February 13, 2022 On 2022. 1. 27. at 오후 11시 23분, DrmCa said: 바이스에 루퍼를 넣고 막대에 열을 가하고 비틀고 당깁니다. thank you. I don't have a vice at home, so I just stayed for a while and fixed it. While applying heat, the looper was moved and pulled out. Thanks, I took it out and replaced it with a new looper. So the sewing machine works well. Quote
Members DrmCa Posted February 13, 2022 Members Report Posted February 13, 2022 At the very least you should buy some visegrips. Quote Machines: Mitsubishi DB-130 single needle, Kansai Special RX-9803/UTC coverstitch, Union Special 56300F chainstitch, Pfaff 335-17 cylinder arm walking foot, Bonis Type A fur machine, Huji 43-6 patcher, Singer 99 hand cranked, Juki DDL-553 single needle (for sale)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.