CFM Frodo Posted February 5, 2022 CFM Report Posted February 5, 2022 (edited) DIY, Foot or Hand control for a servo https://www.youtube.com/shorts/ApFJMlpxnWk parts--https://www.supplyhouse.com/Copper-Riser-Clamps-13662000 https://www.supplyhouse.com/Bluefin-CPPL038-3-8-Copper... misc. 3/8'' all thread rod /nuts/washers. https://favpng.com/.../gun-slings-ruger-mini-14.../T3eUmK0M You will also need a spring. the ruger sling swivel connects the rod to the servo arm. This is a very easy build that anyone with common hand tools can make You will need a drill with a 1/2'' drill bit the rod needs to be loose and able to move as it pushes up you need a 1/4'' bolt 1'' long with locking nylon nut to hold the riser clamps, they also need to be loose I used the spring from the clamp most of us have to hold our leather, I call them chip clips The rod can be bent 90 degrees. just take your time. place 1'' of the rod into a bench vice then pull the rod slowly 90 degrees I covered my rod with a piece of copper pipe. as i scrounge more pipe i will cover the remaining rods Edited February 5, 2022 by Frodo Quote Singer 66, Chi Chi Patcher, Rex 26-188, singer 29k62 , 2-needles D.C.F.M
CFM chuck123wapati Posted February 5, 2022 CFM Report Posted February 5, 2022 very cool !!!! Quote Worked in a prison for 30 years if I aint shiny every time I comment its no big deal, I just don't wave pompoms. “I won’t be wronged, I won’t be insulted, and I won’t be laid a hand on. I don’t do these things to other people, and I require the same from them.” THE DUKE!
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.