rodeomic

Thanks everbody. I think I'm going to try and modify a cowboy cuff pattern. I made a prototype from heavy construction paper, and I think it can be done. Probably use a lighter leather than I would use for a cuff. Any idea's out there? Thanks again, Roger

No, I asked. Short of the commercial brands on the internet, I haven't found a thing. I have a hunch he may just want to order a set from Stihl, or another maker. Thanks for the response.

I have a request for "arm chaps", to be used by an employee of a local tree company. I know they are sort'a, kind'a, similar to cowboy cuffs, but I believe they would have a thumb hole. Anyone out there have some how to advice on these? Patterns, etc. Thanks in advance! Roger

I have a request for "arm chaps", to be used by an employee of a local tree company. I know they are sort'a, kind'a, similar to cowboy cuffs, except I believe they would have a thumb hole. This site has never failed me yet, so I hoping someone out there can offer some how to help, patterns, etc. Thanks in advance, Roger

Ah-Ha!!!! I did it. I just wrote asking how to create a new topic. I actually figured something out on my own! :-) Thanks again, Roger Name: Roger UserName: rodeomic IP Address: 198.59.47.100 Email Address: fain.roger@gmail.com

Hello, I don't remember how to create a new post!!! :-( Help please? Thanks in advance. Happy Trails, Roger Name: Roger UserName: rodeomic IP Address: 198.59.47.100 Email Address: fain.roger@gmail.com

Thanks for the response. Most of what I do is from pattern pak's, then add my own flavor! But, just from what you said, sounds like the Stohlman book could be a good investment. Thanks again. Happy Trails, Roger

I keep seeing "The Art of Making Leather Cases, Vol. 3 by Al Stohlman" referred to. Is it just a bunch of pictures of his stuff, or, are there patterns available, and is the book really that helpful? I ask because I have purchased books by other "experts", which were basically a work of "look what I did". Thanks! Roger

Hello-a comment on your "sore hands". But first, nice job on the bags. I prefer hand-sewing most projects. One thing I did some years ago to help ease the "sore finger land", was buying a pair of relatively cheap, padded palm drivers gloves. I modified the gloves by cutting the fingers off at the knuckle, (just above your ring). I restitched the cut area for reinforcement. The padded palm acts great as a needle push, and the fingers makes a hug difference when tensioning the thread. I also cut the thumb completely out, and reinforced that area with a strap and glove snap. Hope this sort of makes sense.

Will do! Thanks Bill. Roger

Not sure this is the right forum for this, but----I have been eye balling the Tippmann Boss sewing machine for quite sometime. Anything, good or bad you might be willing to share will be greatly appreicated. Thanks in advance, Roger

Wow! Not only did it help, it solved the mystery for me. Thanks so much Ken. I appreciate that.

Melanie, I will just ditto Casey here. Tandy sells pretty decent strap and lace cutters. To me, the wing divider is most useful for measurements and setting space distance. Good luck, Roger

Hello all- This is probably a dumb question. But----I have found folks here to be most forgiving and willing to help. Friend asked me to make him a guitar strap. I was sort of like, OK---hmm, now what? I'm ok with the buckle setup for the front guitar button, but, even after looking at several pictures, I can't determine how the back billet anchors. I see how it will attach to the button, but don't know quite how to keep it from slipping. Thanks in advance! Roger

Thomas, as advised earlier, I to would steer away from epoxy. It's too stiff, and I would wonder what the lasting affects to leather would be, if any. As far as the stitching holes, you and I aren't far off there. I use a dremel tool, with bits one size smaller than the needle I will be using. I started this method solely due to my hands just not taking the pressure from the awl anymore. Something to do with age and arthiritis? Nah---couldn't be. ;-) Good luck. Roger

No, but I have used acetone. Not familiar with Goo Gone. Good luck! Roger

You did a nice job of fitting them to your boots. I have made several sets of the beavertail strap, but have not incorporated the concho in such a way. I really like that----great job. Now, all ya gotta do is introduce them to the ole pony!

Well-----how about WOW! Beautiful set of stirrups. Nice job!!!!!

Hello all, This doesn't have a great deal to do with leather, but it can come in handy. Most of you have probably discovered it already. I'm aways looking for containers for anything from dye to glue to water, nuts, bolts, etc. I recently found that if you cut the bottom----about three inches or so from a 2 litre soda container, they work great. If you want to get really picky, RC cola has a flatter bottom, but I buy whatever is a dollar special at wal-mart. Also, would like to think those that responded to my question regarding the use of virgin olive oil. Happy trails and Stay warm!! Roger

Charlie R: Thanks for your question, and to those that responded. I had considered buying that setup, but have held off due to being unable to find any articles on them. You folks just saved me some money!! So, what do I owe ya!! :-) Thanks, Roger

Good morning. I have read articles recently where the author mentioned using virgin olive oil for their finish. Could someone please speak to that, and maybe share your experience using that oil? Thanks in advance. Roger

John, If I may add to JayMack's response regarding Tandy scabbard patterns. I would recommend buying the "Old West Collection" pattern pack, item # 6015-06. I have found the Tandy pattern packs leave alot to be desired. Just my two cents worth. Happy Trails, Roger John, Old West Collection is offered by Tandy as well. Roger

Thank you! I will try to contact her. Happy trails! Roger