-
Content Count
45 -
Joined
-
Last visited
Everything posted by watersnake
-
What do the different titles for members eg Ambassador mean
-
Different Leatherworker.net membership choices. Contributing members get extra features and permissions on the board. To become a member click on Subscriptions & join… It is worth it considering the wealth of information found here.
-
I'am a contributing member already
-
Ambassadors are volunteer 'meet and greet' folk tat make sure newcomers know their contributions are appreciated. A huge responsibility on a site like LW. Moderators try to keep some semblance of order... hope this helps!
-
-
Thank you to those people that answered my questions over the past few days , You have been very very helpful
-
How do I get the edges of my embossed work all neat an smooth around the edges
-
On this page click on the 3rd subject "How Do I Do That?" and then click on "Finishing Edges" By hidepounder. There you will find expert information on the subject.
-
He's talking about the edges around embossed areas. You can use a combination of beveling and smoothing with a modeling spoon to give your embossed areas nice smooth edges.
-
-
how do I sharpen an edge tool
-
I use fine grain wet/dry sanding paper. Cut a trip the width of the slot in the edger and sharpen the inside edge with this.
Sharpen the outside edge either with a sharpening stone or bigger piece of the paper, remembering to follow the curve.
It can be a bit fiddley but saves buying a fine jewellers file or some such.
Hope this helps
-
I used a small diamond tip dremel tool on mine yesterday and it worked a treat. You have to have the right angle and be very quick.
-
i use one of the edger sharpener things form w
from weaver. strips of leather, wax and
oxide grit on one and a rouge polish on
other
-