Jump to content

KGV

Members
 View Profile  See their activity

  • Content Count

    52

  • Joined

  • Last visited

Posts posted by KGV

  1. Posted · Report reply

    Hi all!

    Looking for this specific tool http://kawazairyo.com/?pid=65848611 or something that will let me flatten the edges like this one does, but preferably in the states. This site doesn't ship outside Japan from what i can tell, but I need a tool like the one pictured.

    I know a few of them are just edge creasers and a few flatten the edge fully, i'm looking for something like the second one, pictured below.

    Specifically this variation http://img02.shop-pro.jp/PA01006/392/product/65848611_o3.gif?20131027192435

    Any help is appreciated!

    Thanks all!

  2. Posted · Report reply

    @DavidL - Thank you as always!

    @billybopp - Thanks Bill!

    @Builderofstuff - I use 3-4 oz. for the exterior, 4-5 oz. will do well but can be bulky. The interior is always 2-3 oz. which works best for the inside of just about any wallet.

    @MonicaJacobsen - Thanks! I take the most pride in those haha

    @Raw Custom - Yes I did, I usually cut it by hand (no template) to a certain size for the big pieces and have cardboard cutouts for the complex pieces: interior pockets, slots, etc.

    @Wild Bill46 - Thanks! I try to make sure that they wont get flimsy over time, sacrifices a thin profile, but it makes them last.

  8. Posted · Report reply

    Hi all!

    Haven't posted in a while, life gets in the way of leather working sometimes, haha. I'm getting back into leathercrafting and I saw some crazy stuff recently, glazed natural leather. I looked for some to order but the only one I've found is from japan and the shipping outweighs the cost of the leather, so I started to look into hand glazing it myself. I've seen a few people that have done it but they keep their process secret, which left me at a dead end. If anyone here has ever done it or can point me in the right direction as to where to find techniques, materials, and tutorials I'd be extremely grateful!

    Thanks all!

    Best Regards,

    Kevin

  9. Posted · Report reply

    @joesnuffle - I feel the same way! These were some of my earlier pieces but recently I've shifted to using the natural/undyed variants of cord, looks much more subtle, thanks for the tips!

    @stangman645 - Thanks a lot! To be honest I've modified the design so much to make it ergonomic and easy to handle I couldn't tell you. But now I cut the inside piece to 9mm x 23mm and the back to 9mm x 27+mm depending on what weight leather I use. Usually I use 3-4 oz. For the exterior and 2-3 oz. For the interior. Shoot me a message if you have any more questions, I'm happy to help!

    @nguoilamvuon - thank you so much :)

  11. Posted · Report reply

    Drop Handle Joint / Wallet Chain connector / Door knocker stud / Whatever they're called, I need to get some preferably from a CONUS supplier, the ones from japan take at least three weeks to get here.

    Anyone know where i can buy some? Thanks!!!!

    $_35.JPG

  16. Posted · Report reply

    @Russ - Thanks a lot! I was very wary about my first bifold but I loved making it, definitely more to come!

    @Neillo - Much appreciated! I can't wait to see the H/O age, this particular piece of CXL was from the butt end of the hide, it had a lot more shine and a richer color than CXL i've worked with in the past, I was sad to see it go but i'm sure my customers are happy haha. As for the flap it stays down just fine, I thought I would have to form it as well but after a few days of wearing it in the flaps stay down just fine.

  20. Posted · Report reply

    Hi all,

    I'm looking for some Japanese leather craft books, preferably used or discounted, most of the ones i've found are upwards of $50 and are hardcover, I don't hardcover, and don't care if the book is a little scratched up.

    Specifically this is the book i'm looking for, but anything pertaining to wallets, bags, or small leather goods would do!

    Hand Sewing Leather Vol. 1 Leathercraft Book For Stitching & Making Leatherwork

    __KGrHqYOKiQE60L_QIvpBPjir_r8_w__60_1.JP

    (P.S. I know goodsjapan has this for sale, I'm just trying to find one that isn't $60 if i can help it)

    Thanks!

  25. Posted · Report reply

    A local supplier (Landwerlen Leather) here in Indiana has some seconds, but getting a specific color is hit-and-miss. I have bought Phantom Rust and a chestnut, among others. However, the prices is $6 per pound (yes, that's right). I will be visiting again soon, and would be willing to look. Any particular brown you are looking for?

    Springfield Leather in MO also carries Horween, at 9.50-10 per sq ft, not seconds.

    -JV474

    John I appreciate the great info!

    Id be interested in that.

    I sent you a pm!

×
×
  • Create New...