oldcowpoke

Hi I have a # 17 spot setter for sale with 6 die setups its a foot opereted hopper feed it is from stanard rivet co. price 3800. obo email oldcowpoke@charter.net

This came off the campble randall site The Cyclone utilized the best technology of the day. It featured a reliable awl feed mechanism, which limited the speed to 500 SPM, but could out perform the Union’s needle feed. The rotary shuttle held a large bobbin and it would accommodate 3 to 10 cord thread. The 12” throat depth allowed for large work and some parts were interchangeable with the Campbell Machine. Best of all, it could sew leather up to 1” thick. Besides the capabilities of the machine, from a mechanical stand point, it was well engineered. The gear drive mechanisms provided a history of low maintenance and high reliability. The custom stand and drive unit allowed the operator to vary the speed according to the amount of pressure he applied to the pedal. Cyclones were setup for sewing harness, tack, belts, bags, handles, cases, saddles, shoes, luggage, and corner stitching. Our records show that by 1917, barely 5 year after its introduction, over 118 Cyclones had been sold or leased. This was one of the best stitchers every built and could out perform anything on the market.

Hi guys I sold Kevin a cyclone and I have another one for sale 4000. as well and a campble 2850 and a landis 3 3300. and a singer 97-10 2250. 4235711364 call me and i will send pic...

That is sold but I do have a good one and a landis 16 and a #3 email me at oldcowpoke@charter.net

This Machine was made in 1910

campbell randall needle and awl machine rebuilt for sale a good tight machine and it pulls a nice stitch $3500. 423 571 1364

Good morning I have been trying to change my email to oldcowpoke@charter.net and when I try it will not let me can you help me or tell me what IM doing wrong ? Name: Jack UserName: oldcowpoke IP Address: 216.41.252.242 Email Address: usaleathermachines@gmail.com

Stanley Bostitch sole press for sale for shoe repair shop ahe press comes with a full set of feet and air but it will need a new Pancake Compressor you can pick them up for a $100 dollars or so the press is priced at $1500 obo 423 571 1364

Comelz 4 Thermo-Cementing and Folding Machine Price $2500. Thermo-Cementing and Folding Machine for uppers, leathergoods and automotive interior trim. COM 4A is a machine used to perform an even and finely finished edge folding: it folds both open and fully closed uppers <LI>it can insert a topline reinforcement. The pleating and snipping facilities make it easy to obtain evenly folded curves and avoid any distortion of the work pieces. The efficient thermo-cement distribution unit provides for a precise and stainfree adhesion. PRACTICAL A functional and efficient work area is the essential condition to reach maximum output. On COM4A the wide accommodation of the hands and the excellent visibility provide for optimum working conditions; all controls are grouped in logical areas and can be easily reached by operator, who can comfortably make all adjustments without using any tool. PRODUCTIVE The most important features which enhances the performances of a folding machine are the work feed rate and the reduction of downtime to a minimum. On COM4A, the rotation speed adjustable up to 2,400 rpm, joined by a wide range feed pitch adjustment, provides for very high processing speeds. The guide system, which provides for 3 to 7 mm adjustable folding width by simply moving a lever and without any part replacement, makes the feeding of the workpiece easier, thus reducing unproductive time. VERSATILE COM4A can be fitted to perform any special folding work: <LI>french style (binding) <LI>flat insoles <LI>leathergoods <LI>automotive interior trim <LI>roll top finish. Optional fittings are easy to assemble and the operator himself can change them in a few minutes. FUNCTIONAL COM4A features a homogeneous design; both electric and electronic parts, as well as mechanical parts, are integrated into the basic structure and divided into independent and functional units. Large covers provide for simple maintenance: the inmost parts of the machine are readily accessible.

Inseam chandler for sale in working order price 3000. obo 423 571 1364

Landis sole stitcher for sale one Like new in a red cabinet Nice price 3000. obo the landis K price 1500. 423 571 1364

Shoe finisher for sale around 4 foot long runs off 3 pase the brush unit on the right side has a button on the top that rotates the brushes and there are 3 sets that will come around price $4500. obo 423 571 1364

Sole press swing arm type for sale with air and the feet for womens and mens shoes and boots price 2850. obo 423 571 1364

DN2000 Lock stitch McKay for sale in TN. price 4500. obo call 423 571 1364 the lock stitch machines are a hard find today and IM lucky to have found this one

Email me Hi all we have 4 Landis # 16 for sale and 3 Landis # 3 all in exultant condition the 16's are priced at $2850. and the # 3 around $3000 here are a few pic.. Call or request more pic.. 423 571 1364 JJ