Jump to content

tribo korokan

Members
  • Posts

    41
  • Joined

  • Last visited

Everything posted by tribo korokan

  1. I notice that the singer 111 has the same set up with consew 229 that I just bought to change the stitch length.My own problem is that the plunger to lock it down on machine bed is missing. Can I stick a metal in that hole to lock in the notch and turn the handwheel on to change the stitch length?
  2. Are there other ways to lock the notch and change the stitch legnth if that original part is missing?
  3. How do you change the sttich legnth for consew 229. I read in the instruction similar to singer 111. To push and hold the plunger to lock the notch and keep truning the pulley in the machine. I just found out that the old machine I bought has no plunger to lock it. Can I use any metal or screw driver to stock it to the notch? Kinda scary when you are not sure what it is . The pulley that in the manual, is that the hand wheel of the sewing machine? I bought this machine and the guy I bought from never told me about it and I never think of asking cause I presume that would not be a problem.. attach is the pic.
  4. From the album: zl

    screw driver inserted to turn the screw in the bobbins case
  5. From the album: zl

    Inset screwdriver and turn the screw in the bobbins case
  6. Got it. Thanks so much.
  7. attached is the picture of the post bed consew 229
  8. From the album: zl

    consew 229 post bed
  9. From the album: zl

    consew 229 post bed
  10. From the album: zl

    consew 229 post bed
  11. From the album: zl

    consew 229 post bed
  12. From the album: zl

    consew 229 post bed
  13. I bought a used consew 229 post bed and don't know how to remove the bobbins case so I could adjust the thread tension .There must aslo be a similar post bed sewing machine .
×
×
  • Create New...