CalypsoReCreations

It’s in the side seaming and boxed corners these bags get too much for my machine to handle. It’s also a matter of wrangling the top edge through my flatbed machine.

Go to #calypsorecreations on Instagram for better pics. I’m having a hard time uploading on this forum. My file size is too big. Thanks for the suggestion!

Thanks! I have made a list of things I need out of my next machine. A cylinder arm is what I think will really help and fill the work gap in my studio. My Sailrite can handle a good deal, it just falters on the finishes of my work (it struggles over varying thicknesses and over major seams). I do a roll down top finish in my sail totes. The Sailrite can’t evenly walk the thickness through (even with the walking foot). My Viking handles all my lighter work beautifully. Thanks for the suggestions about the Yamata. You have a good point about paying a dear price and wanting it to work effectively. Also, I think I want to buy something I can have support for. I appreciate all the feedback!

Hi, Wiz! I was hoping to see you here after reading your other post responses! I’m realizing the Yamata is probably not the best idea as I am not a machine tech, and do rely on customer support with my other machines. I sew thicknesses of up to 1/2 thick of mixed textiles (usually canvas, Dacron). Sometimes, when attaching a leather strap, I sew the leather directly onto the Dacron and canvas combined. I use salvaged horse tack (reins, bridles, chest harness, etc) for my straps. I need a machine that can handle the load, but won’t tear the bag apart. I really want a cylinder arm for the roll top finishes on my up cycled sail bags. My thoughts are the Cowboy CB227R or the TechSew 2700. I am also looking at a used Singer 153 B8B listed here: https://www.ebay.com/itm/SINGER-153-B8B-CYLINDER-BED-WALKING-FOOT-REVERSE-110V-INDUSTRIAL-SEWING-MACHINE-/133109582798 There is so much to consider, and I feel a bit overwhelmed. I know that I want a cylinder arm, compound feed machine. Now, it’s just about deciding which is too much power, and which is not enough. Thank you for your help!

Thanks for all the info! What a help! I know of no one to call for mobile repair here. I work on the machines myself, but there is a lot of Sailrite tech support via video and customer service. My Viking is pretty straightforward, and I do all the work on it myself resourcing the manual and YouTube. I’d prob have to take any industrial machine I bought into Eugene, Lincoln City, or Corvallis for a serious repair. Also, it Sounds like setting up the Yamata will be more daunting than I originally thought. I need to do some digging and see if there’s a tech in a nearby town that could come help me get it tuned after set up. Still thinking about the Cowboy, though. Thanks again!

Thanks for the pointers! Ideally, I’d like to spend less than$1,500. However, I’m finding that difficult with the perks I’d like the machine to have. That’s why this unassembled Yamata looks so appealing. You’re right, though. I don’t want t regret what I buy!! I just went to the Artisan site and will dig around there. Thanks again!

Hello. I am so thrilled to have found this forum. I have spent hours poring over the information here, and am learning so much. Thank you! I sew handbags, totes, etc out of salvaged sails, horse tack, marine vinyl, and waxed canvas. I currently sew on a Sailrite LSZ-1 and a Viking 6270. I push these machines perhaps a bit past their limits. I am looking for a cylinder arm industrial machine that will allow me too tackle some more heavy duty work with these materials. I found this Yamata on eBay. I am wondering what you guys think compared with the Cowboy CB227R and the TechSew 2600? This one is cheaper, even though it does require at home assembly. I am pretty handy, and I’m married to a mechanically minded individual. I am not really afraid of the assembly. I just want to make sure I get the right machine for the job. Any advice is greatly appreciated. Thank you ! https://www.ebay.com/itm/Yamata-GC335-10-Arm-Cylinder-Bed-Walking-Foot-Sewing-Machine-Stand-Servo-motor-/323503216189?_trksid=p2385738.m4383.l4275.c10

Hello! I am an amateur handbag crafter. I currently make bags out of salvaged sails, salvaged horse tack, and cast off marine vinyl as well as waxed canvas. My work is usually a mix of fabrics. You can see samples on my Facebook page https://m.facebook.com/saphaeron/, and find me on Instagram #calypsorecreations. I would like to understand leather work much better than I do. I’d like to incorporate more leather into my designs as well. I’m currently also looking for a cylinder arm machine that can keep up with my pattern ideas, but that won’t break the bank! I currently sew on a Viking 6270 and a Sailrite LSZ-1. I push them both to the limit (or a bit beyond). I look forward to the opportunity to learn from you all!