Jump to content

Search the Community

Showing results for tags 'Feed dog'.

  • Search By Tags

    • feed dog ×
    Type tags separated by commas.

  • Search By Author

Content Type


Find results in...

Find results that contain...


Date Created

  • Start

    End

Last Updated

  • Start

    End

Found 9 results

  1. aaronthearcher
    Got my narrow foot set and feed dog set from @Patrick1 at HEP My ferdco didn’t come with a feed dog or plate. And also the narrow foot I have wasn’t open for visibility in the front of the toe. Patrick’s sets are beautifully made. Haven’t sewn more than a bunch of scrap yet as I just installed the...
  2. Gymnast
    This is a general question, that relates to a more "normal" sewing machines with ordinary drop feet (not walking foot). Most people with some knowledge of sewing machines know about, that the timing of the hook in relation to the needle is important. But the timing of the feed dog are not an is...
  3. rab135
    (I’m both a new leatherworker and a new sewing machine user so be careful not to underestimate my ignorance of either!) I purchased a Techsew 2750 before Christmas and have had a lot of fun creating a few handbags and smaller items with thinner leather. My problem, at this point, is that I...
  4. Diyer
    As my new "monster" Adler 205/370, will be sewing thicker and larger items, I have bought an Adler 169/373 for thinner leather and material work. I spent most of the day trying to work out why the feed dog did not rise and fall as it should. Turns out that my machine was originally set up for bindin...
  5. CSM68
    Can you help? Chicago member here and NEW on this machine, which I inherited from my mom. I'm a lifetime seamstress (about 38 years, I guess). Machine was not used for about 35 years so I oiled it up, all seemed fine, I knocked out a quilt, but then it seems to be sewing BACKWARDS. Feed dog issue? H...
  6. BlakeSmith
    So I have a Techsew 3650 HD that I haven't used in about 2 years because the feed dog leaves the ugly tracks on the underside of my work (I'm only using 5 oz. Leather) I was wondering if anyone has ever filled those grooves on the feed dog with epoxy or another sealant and whether or not that w...
  7. The Mean Tambourine
    Help guys! I'm in a time crunch and after 5 hours of trying to figure out what's wrong, I"m going crazy. Here's what happened: I replaced my hook and shuttle, and while the needle was just barely grazing the hook tip, it worked fine for about a week. I then started breaking needles, and my t...
  8. najram2007
    Hi Guys Ive been looking at a few used machines lately and wondering if the needle plate, feed dog and cylinder cover plate for the pfaff 335, Seiko LSC and the consew 277 are interchangeable? Thanks. Marjan
  9. Scott W
    I have an Adler 67 GK373. I'm using 138 thread top and bottom with 134-35LR size 21 needle. I'm sewing 6-7 oz vegetable tanned leather. Everything works fine until it is time to turn. Normally you would turn the work with the needle down but when I do that the bobbin thread ends up pulling through o...
×
×
  • Create New...