Contributing Member fredk Posted August 17, 2022 Contributing Member Report Posted August 17, 2022 This; There is short pin in the outside holes. These go up against your belt or strap. The lines are to help with the linear spacing of the buckle-tongue holes. The spring clamps were just put on to hold the thingy in place whilst I photographed it. They are not needed in use Quote Al speling misteaks aer all mi own werk..
Members Bert03241 Posted August 17, 2022 Members Report Posted August 17, 2022 yep thats what I was takin about Quote
Contributing Member fredk Posted August 17, 2022 Contributing Member Report Posted August 17, 2022 For handiness I have three sizes; (old picture, before the big one got the lines added) Made with some scrap acrylic and some 3mm aluminium tubing. They each took about 30 minutes maybe to make, using hand tools. Would take less time with power tools. Cheap as chips to make but worth a ton of gold Quote Al speling misteaks aer all mi own werk..
Members Bert03241 Posted August 17, 2022 Members Report Posted August 17, 2022 Im gonna laser cut a few Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.