Searching for a 3/8” gauge set for Mitsubishi LT2-230

[Josh518]

Hello!   Were you able to order the parts and how much were they?  I have a couple Mitsubishis and I found the same problem for some selected parts. 

[CowboyBob]

11 hours ago, Josh518 said:

Hello!   Were you able to order the parts and how much were they?  I have a couple Mitsubishis and I found the same problem for some selected parts. 

The parts are crazy high $$ the above parts are $728.00

[pgc]

On 11/19/2022 at 8:26 PM, Josh518 said:

Hello!   Were you able to order the parts and how much were they?  I have a couple Mitsubishis and I found the same problem for some selected parts. 

Hi! Sorry, but I did not see this question until now.

I did not order OEM parts. As noted earlier, they are very expensive.

I ordered this feed dog, needle plate, and needle clamp for a Juki LH-3578A-7, as it appeared to have the correct dimensions. It fits perfectly and I am now running a 3/8” gage. It was $32 USD.

https://www.ebay.com/itm/144330362304?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=srvQhjPuSfm&sssrc=2349624&ssuid=6ukoqdfzqwq&var=&widget_ver=artemis&media=COPY

 

[Constabulary]

@pgc That is a great information - I love figuring what parts are interchangeable between different brand machines. Often the Japanese brands and a lot of nowadays Chinese made machines seem to have a very similar "standard" (if not the same) and are often Singer based.

The gauge set you linked (just from looking at it) looks pretty much like the Singer 212 Gauge sets.

Thanks!