MtlBiker Posted November 14, 2022 Report Posted November 14, 2022 I think I've been oiling my machine properly, perhaps even over-oiling it (better safe than sorry), but after having some service done I noticed there is a wick under the machine on the right side that seems to end just hanging... like in the air. It doesn't look right to me but I can't see where it should be attached or tucked. Does it look correct to you folks or should be be somehow reattached? Thanks! Quote Current machines: Janome HD3000 and Skyline S5, Consew 206RB-5, Singer Profinish serger, Techsew 2750 PRO, Sailrite LSZ-1 Premium, Consew DCS-S4 Skiver
CowboyBob Posted November 15, 2022 Report Posted November 15, 2022 On 11/13/2022 at 7:08 PM, MtlBiker said: I think I've been oiling my machine properly, perhaps even over-oiling it (better safe than sorry), but after having some service done I noticed there is a wick under the machine on the right side that seems to end just hanging... like in the air. It doesn't look right to me but I can't see where it should be attached or tucked. Does it look correct to you folks or should be be somehow reattached? Thanks! On the front there's 3 oil holes marked red,the 2nd one down on the rightside has a tube with an oil wick in it that wraps around the top of a bushing,somehow it got unwrapped & fell down.Try to follow it to the other end & you'll see where it comes out of the tube. Quote Bob Kovar Toledo Industrial Sewing Machine Sales Ltd. 3631 Marine Rd Toledo,Ohio 43609 1-866-362-7397
MtlBiker Posted November 15, 2022 Author Report Posted November 15, 2022 @CowboyBob - Thanks very much! I'll take a closer look tonight when I get home. Yesterday I didn't see anything that looked to me as being wrong. Quote Current machines: Janome HD3000 and Skyline S5, Consew 206RB-5, Singer Profinish serger, Techsew 2750 PRO, Sailrite LSZ-1 Premium, Consew DCS-S4 Skiver
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.