Members Constabulary Posted January 7, 2023 Members Report Posted January 7, 2023 (edited) Some years ago I was in about the same situation when I was hunting for a Singer 34K NB: https://leatherworker.net/forum/topic/66729-singer-needle-bar-i-could-use-some-help/ The REX here is a clone of the Singer 16-188. NB in the Class 16-188 parts list is # 4264 so this should work: https://www.ebay.com/itm/292096957975 You may find it from other dealers too. EDIT: And don`t forget the needle bar clamp. I would also order some needle plate screws and 1 or 2 new check springs or a complete tension unit, 1 or 2 bobbin cases and a new CB hook just to have spares on hand when needed. The parts are not really expensive. Edited January 7, 2023 by Constabulary Quote ~ Keep "OLD CAST IRON" alive - it´s worth it ~ Machines in use: - Singer 111G156 - Singer 307G2 - Singer 29K71 - Singer 212G141 - Singer 45D91 - Singer 132K6 - Singer 108W20 - Singer 51WSV2 - Singer 143W2
Members Handstitched Posted January 8, 2023 Members Report Posted January 8, 2023 I've seen so many restores on this site, just proves nothing is impossible I can't help but notice the remains of what looks like a sump gasket sitting on the bed, and a tube of gasket sealer . Should look quite good when its finished HS Quote ' I have a very gweat friend in Wome called Biggus Dickus, He has a wife you know, do you know whats she's called? Incontinentia.......Incontinentia Buttocks '
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.