Magulv Report post Posted December 7, 2022 Hi everyone! First time visiting Leatherworker.net, so please bear with me if my post is in the wrong thread, or if my problem is not suitablefor this site. I'm at my wits end here, so I'm hoping someone can shed some light on whats going on here: I decided to try to dye a pair of painted whole cut oxfords, in an attempt to make them darker. The leather is originally painted, medium brown. I'm dying them with a very dark brown, Saphir Teinture franscaise. (I cleaned the leather with Saphir Renomat before applying the dye). After applying dye in three rounds, the leather (surprisingly) seems to take the dye well, darkening the color evenly. But on both shoes there is an area of about 1x2 inches that doesn't seem to take the dye. This area remains the original color (but with a super matte surface). When applying dye to the area the leather immediatly absorbes the dye and dries up. On the rest of the leather the dye takes 5-10 minutes to dry/absorbe. I've tried dying the problem area with additional two rounds of dye, but it just keeps absorbing it immediatly, without any change in color. What's going on here, and what can I so to solve this? Any tips or thoughts will be greatly appreciated. Thanks! Quote Share this post Link to post Share on other sites
Burkhardt Report post Posted December 8, 2022 Pictures? Quote Share this post Link to post Share on other sites