MICHAELALLEN Report post Posted December 26, 2022 Good day guys and Gals, I hope you had a Merry Christmas. I want to line the inside of a wallet with some fabric. What would be a good adhesive to use so it won't bleed through and be flexible enough? I can't find a clear answer anywhere. This fabric is going to be sandwiched in-between two pieces of leather with a little cut out in the middle showing the fabric. I have some fabric that is thicker and designed for the outdoors but it isn't too hard. It still has a nice feel to it. Any help would be greatly appreciated. Quote Share this post Link to post Share on other sites
Simplejack1985 Report post Posted December 26, 2022 Gorilla spray glue or 3m spray glue. Check your hardware store Quote Share this post Link to post Share on other sites
fredk Report post Posted December 26, 2022 Copydex Quote Share this post Link to post Share on other sites
MICHAELALLEN Report post Posted December 27, 2022 On 12/26/2022 at 1:26 PM, Simplejack1985 said: Gorilla spray glue or 3m spray glue. Check your hardware store I almost bought the gorilla stuff but thought it would be too stiff. But I can try it if you use it. Quote Share this post Link to post Share on other sites
doubleh Report post Posted December 27, 2022 I have used both 3-M spray and Weldwood brush on contact cements. Although it is a little more trouble to apply I prefer the Weldwood. To be honest the results have been the same. They both do the job and do it well. Quote Share this post Link to post Share on other sites
