Members DaveP Posted December 31, 2022 Members Report Posted December 31, 2022 Looking for a lot of help constructing a canted sheath for a fixed blade knife. In the picture I have a pattern drawn with the forward belt loop to be folded in half. This is for a left hip orientation. Trying to use a sewn in loop as seen in picture for the second belt loop. Not sure what I'm really doing with this. So allbof your expertise would really be appreciated!! Quote
Members DaveP Posted December 31, 2022 Author Members Report Posted December 31, 2022 Something like this... Quote
Members DaveP Posted January 1, 2023 Author Members Report Posted January 1, 2023 Someone has been where I'm at working with sheaths. PLEASE HELP!! Quote
CFM chuck123wapati Posted January 1, 2023 CFM Report Posted January 1, 2023 take your sheath pattern( forget the loops at this point) and lay a ruler across it at the angle you want your belt put your belt loops at right angles to your ruler. the sheath in your first pic wont lay at the same angle as the second sheath pic it will ride at about 45 degrees and most of the handle will be way above your belt line. Quote
Members DaveP Posted January 2, 2023 Author Members Report Posted January 2, 2023 (edited) Still confused about what the back is supposed to look like! Here's another drawing I just finished. Kinda! Pic has my knife. I've made a couple horizontal sheaths but I really like this design from pic above. Second picture is my horizontal design. It's 5 layers thick at the loop. In this drawing the 2 long horizontal lines is the belt. I'm missing something with this! Edited January 2, 2023 by DaveP Quote
Members DaveP Posted January 2, 2023 Author Members Report Posted January 2, 2023 My horizontal. Quote
Members Gezzer Posted January 2, 2023 Members Report Posted January 2, 2023 On 12/31/2022 at 5:48 PM, DaveP said: Something like this... I believe that the one slot you see here is the only slot . when in use the belt will not allow for much movement at all . just my $0 .02 Quote
Members DaveP Posted January 3, 2023 Author Members Report Posted January 3, 2023 4 hours ago, Gezzer said: I believe that the one slot you see here is the only slot . when in use the belt will not allow for much movement at all . just my $0 .02 I don't believe one slot/ loop will hold in this position. Quote
Members DaveP Posted January 3, 2023 Author Members Report Posted January 3, 2023 It also looks like several layers. Just can't tell what or where they are. Quote
Members Gezzer Posted January 3, 2023 Members Report Posted January 3, 2023 Get in touch and these folks might help . call 740-664-3335 or email us at eaglebrandct@gmail.com! Quote
CFM chuck123wapati Posted January 3, 2023 CFM Report Posted January 3, 2023 14 hours ago, DaveP said: Still confused about what the back is supposed to look like! Here's another drawing I just finished. Kinda! Pic has my knife. I've made a couple horizontal sheaths but I really like this design from pic above. Second picture is my horizontal design. It's 5 layers thick at the loop. In this drawing the 2 long horizontal lines is the belt. I'm missing something with this! this will work just fine. i cant tell from the pic either it may be the back loop also covers the slot. like it would resemble the whole triangular back shape from your loop edge all the way around the slot and be the reason the slot area is sewn in the picture/ your belt would go directly into the loop section from the slot if you get my meaning. Quote
Members MRknives Posted January 17, 2023 Members Report Posted January 17, 2023 (edited) It appears to be a double layered sheaths and just the one loop it’s sewn back to itself. I do believe that would hold well enough Edited January 17, 2023 by MRknives Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.