Members Svey302 Posted February 16, 2023 Author Members Report Posted February 16, 2023 (edited) Good day, I have installed the servo motor in the picture but I am a bit confused with the set of instruction. There is 2 type of gesture or action possible. "Press" which I think I understand. Then "Flip" which I don't understand what I should do. I don't know if anybody else as a similar motor or experience with one, I would like to understand. At the moment, I can set the speed and use the machine but that is about it. Tx Yves Manual1_1676377433902.pdf Edited February 16, 2023 by Svey302 Quote
Members Beanwood Posted February 17, 2023 Members Report Posted February 17, 2023 I don't have one of these, but... Is it a case of pressing it so the needle is in up or down position by default when you stop sewing. If you press the button again, it flips the default to the other? Quote
Members Svey302 Posted March 6, 2023 Author Members Report Posted March 6, 2023 (edited) Good morning, I was trying to use a magnetic seam guide to align my sew line. The cover plate over the bobbin, keeps sliding right preventing the guide from doing its job. Something is obviously missing to lock the cover place, what I am looking for? Looking at the drawing, I think it is part 893 06 820 7 ZYL. SCHR. M3X3. What could I find to replace that part? or is that part available somewhere? Tx Yves Edited March 6, 2023 by Svey302 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.