Cabinet Swap

[327fed]

I have a well worn and cantankerous Consew 225 with a clutch motor and homemade speed reducer. My friend has a pristine Juki LU 562 with reverse. Looks like it just came from the factory. Would the Juki be a direct swap to my table and motor/reducer setup as they are both Singer clones? I would consider buying his if the table would fit both, but the stuff in my leather shop would make a table swap close to impossible. 

 

[fibersport]

I'm not familiar with the Juki line but my Pfaf fit right into the opening that had my Singer, I do believe the openings are pretty standard although you might have to tweak things a little.

[Wizcrafts]

12 hours ago, 327fed said:

Would the Juki be a direct swap to my table and motor/reducer setup as they are both Singer clones?

Yep. At one point in time, I had two Singer (96k40 and 31-20), one Juki 563 and a Pfaff 138 all fitting onto the same table. I had to move the knee lever around to use the different heads