singer 111w103 issues

[CowboyBob]

7 hours ago, SeanRoss217 said:

@AlZilla thank you, I was wondering how that worked. I will mess with it some more this coming weekend and report back if im able to figure anything out

@CowboyBob does your company sell the feed regulating spindle for the 111w103

Sorry,they have been discontinued yrs ago,usually the threads are broken on the shaft making the spindle unusable.If you release the tension(or take out screw BB & back screw CC out)  on the stitch mechanism it(spindle) will slide all the way in & use screw CC to adjust the length & then reinsert CC to lock it from backing out.

[CowboyBob]

On 12/26/2023 at 10:47 PM, SeanRoss217 said:

@AlZilla thank you, I was wondering how that worked. I will mess with it some more this coming weekend and report back if im able to figure anything out

@CowboyBob does your company sell the feed regulating spindle for the 111w103

@AlZilla I just saw 3 of these spindles on ebay

[AlZilla]

6 minutes ago, CowboyBob said:

@AlZilla I just saw 3 of these spindles on ebay

No, that would be a @SeanRoss217 alert. Hopefully he sees this and gets on it before it's too late!

I'm just a curious onlooker in this thread.

Edited December 29, 2023 by AlZilla

[CowboyBob]

7 minutes ago, AlZilla said:

No, that would be a @SeanRoss217 alert. Hopefully he sees this and gets on it before it's too late!

I'm just a curious onlooker in this thread.

Oops!Thanks for catching it.

Edited December 29, 2023 by CowboyBob

[SeanRoss217]

@CowboyBobi actually saw those on eBay but was to slow. Unfortunately I missed them. Hopefully a few more are found and put up for sale