Dickeybill Report post Posted January 3 Need help removing hand wheel pulley. Took out two set screws, not sure how to release the stitch length knob to get the pulley off shaft. Trying to get the pulley hand wheel off of my parts machine to put onto my complete minus hand wheel machine. Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted January 4 12 hours ago, Dickeybill said: Need help removing hand wheel pulley. Took out two set screws, not sure how to release the stitch length knob to get the pulley off shaft. Trying to get the pulley hand wheel off of my parts machine to put onto my complete minus hand wheel machine. When looking @ it turn it clockwise. Quote Share this post Link to post Share on other sites
Dickeybill Report post Posted January 28 Thank you for the response. It appeared that there was a burr or something broken on the stitch length adjustment shaft thread , when turning all the way clockwise it would stop and it would not allow me to pull out the long adjustment pin out of the long shaft. With a little close your eyes kind of a channel lock I was able to nudge it out and not too much damage. Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted January 28 11 hours ago, Dickeybill said: Thank you for the response. It appeared that there was a burr or something broken on the stitch length adjustment shaft thread , when turning all the way clockwise it would stop and it would not allow me to pull out the long adjustment pin out of the long shaft. With a little close your eyes kind of a channel lock I was able to nudge it out and not too much damage. It's very common for the threads to get broken on the shaft.Be careful when re-installing. Quote Share this post Link to post Share on other sites
