Cattleman Report post Posted January 18 So I know the outlaw uses alot of the same parts as other Cowboy machines. Does anyone know if there is a stirrup plate available that will work on the Outlaw? Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted January 18 7 hours ago, Cattleman said: So I know the outlaw uses alot of the same parts as other Cowboy machines. Does anyone know if there is a stirrup plate available that will work on the Outlaw? This plate raises up a good 3/8" if your not sewing over 3/8" of leather it would work. Quote Share this post Link to post Share on other sites
Cattleman Report post Posted January 18 1 hour ago, CowboyBob said: This plate raises up a good 3/8" if your not sewing over 3/8" of leather it would work. Link??? Quote Share this post Link to post Share on other sites
CowboyBob Report post Posted January 18 24 minutes ago, Cattleman said: Link??? If your asking for a link to the plate here it is. Quote Share this post Link to post Share on other sites
Wizcrafts Report post Posted January 18 @Cattleman I use the stirrup and holster plates on my cb4500. The stirrup plate requires the removal of the feed dog. The holster plate (that I have) doesn't. Both lift the work about the same height. You may be able to eek out a little extra lift of the feet by reducing their throw ratio. That's done by changing the position of the crankshaft coming out of the back of the head and attaching to a curved slot on the rear housing. I don't have my machine at home, so I don't recall which direction you have to move the crank. But, lowering the alternating foot lift allows you to eek out a little more sewing thickness in a pinch. Quote Share this post Link to post Share on other sites
Cattleman Report post Posted January 18 3 hours ago, CowboyBob said: If your asking for a link to the plate here it is. What machine is that stirrup plate actually made for... I would like to try and find one to order. Quote Share this post Link to post Share on other sites
Wizcrafts Report post Posted January 19 14 hours ago, Cattleman said: What machine is that stirrup plate actually made for... I would like to try and find one to order. That stirrup plate is made for the Cowboy CB3500, 4500, and 5500. @CowboyBob Kovar, owner of Toledo Industrial Sewing Machines, is the primary dealer in the USA. Here is the Cowboy page of available accessories for the CB3200, 3500, 4500, and 5500 heavy leather sewing machines. The phone number on the bottom of the page is the one you need to call to order parts, accessories, thread, and machines. Quote Share this post Link to post Share on other sites
Cattleman Report post Posted January 19 10 hours ago, Wizcrafts said: That stirrup plate is made for the Cowboy CB3500, 4500, and 5500. @CowboyBob Kovar, owner of Toledo Industrial Sewing Machines, is the primary dealer in the USA. Here is the Cowboy page of available accessories for the CB3200, 3500, 4500, and 5500 heavy leather sewing machines. The phone number on the bottom of the page is the one you need to call to order parts, accessories, thread, and machines. Thank you and @CowboyBob for the info, very much appreciated. Quote Share this post Link to post Share on other sites
