Grunt Posted December 2, 2007 Report Posted December 2, 2007 This is sheath number eight. I figure I will stop counting when my work gets good enough to sell. First pic..front view of sheath. Rear view... Detail view of snap area... Here is the sheath with a matching belt I made to go with the sheath and a pair of my boots. A group pic Hope every one likes them. Regards, Nick Quote
Members Skipknives Posted December 2, 2007 Members Report Posted December 2, 2007 (edited) Nick it looks like a tough rig,,the knife looks like a Busse,, I like the edge of the sheath and belt looks like you put a lot of work in them. PS: did you want the strap that short after the snap or would it work a little easier if you left a short tab?? Edited December 2, 2007 by Skipknives Quote Skip Slocum Phoenix Arizona http://skpslocum.googlepages.com/home
Grunt Posted December 2, 2007 Author Report Posted December 2, 2007 Thanks for the kind words! THe knife is indeed a Busse( well a swamprat anyway). And yes now that you mention it a small tab at the end would be helpful. I will include that on my next sheath. Thanks for the help Nick Quote
Members Rayban Posted December 2, 2007 Members Report Posted December 2, 2007 Nice rig Grunt....I like it a lot....looks like good solid using gear. Try this next time on the retention strap...make it from the part of the leather next to the belt loop. so it's actually part of the back layer of leather, just split it away from the part that makes up the belt loop...hope I'm clear in describing that...let me know if I'm not...I'll send you a drawing as only I can draw it... Quote Raybanwww.rgleather.net
Grunt Posted December 3, 2007 Author Report Posted December 3, 2007 (edited) Nice rig Grunt....I like it a lot....looks like good solid using gear.Try this next time on the retention strap...make it from the part of the leather next to the belt loop. so it's actually part of the back layer of leather, just split it away from the part that makes up the belt loop...hope I'm clear in describing that...let me know if I'm not...I'll send you a drawing as only I can draw it... Yeah that makes sense! I will try that also. I was just going to fix the retention strap with a rivet next time. That's what I like about this place folks are willing to offer up useful advice. Regards, Nick Edited December 3, 2007 by Grunt Quote
Members johnny7 Posted December 3, 2007 Members Report Posted December 3, 2007 Good looking stuff Nick, like the two-tone alot. Johnny Quote
Ambassador Luke Hatley Posted December 3, 2007 Ambassador Report Posted December 3, 2007 Grunt , looks good. as for as the fasting strap take a look at the way i did mine. they are listed on the holsters and knife sheath page.. Quote Luke
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.