Jump to content
Agent319

Singer 221g hardware question

Recommended Posts

I have a 211W155 and a 211G156 and I have the exploded parts view diagram of these machines.  In the diagram the screw parts listed have either a -803, 804, 805, 806, 819, 830, 833, 850 or 819 after the part # and many of those -#'s are the same.  Would anyone know what those dash #'s represent?

Share this post


Link to post
Share on other sites

I came across this https://www.singersewinginfo.co.uk/screw_threads

"Because Singer factories manufactured all of their own components it was not as important for them to ensure standardization of items from different suppliers. Although many older Singer threads matched those of the American and then Unified standards, they continued to use some sizes that were non-standard in order to maintain backward compatibility between parts that were common to different models."

 

Those -#'s after a screw part # is Singer tap/die# used to cut the threads for a screw or a hole.

 

 

 

 

Share this post


Link to post
Share on other sites
1 hour ago, Agent319 said:

Those -#'s after a screw part # is Singer tap/die# used to cut the threads for a screw or a hole.

That's good to know! @CowboyBob has sets of actual Singer taps and dies that he uses to repair old Singer sewing machines in his shop: Toledo Industrial Sewing Machines.

Share this post


Link to post
Share on other sites
20 hours ago, Wizcrafts said:

That's good to know! @CowboyBob has sets of actual Singer taps and dies that he uses to repair old Singer sewing machines in his shop: Toledo Industrial Sewing Machines.

The problem with the 211 is it doesn't use many of the standard screws for previous models (look @ the tap chart I attached) AFAIK the tap kit is NLA either just like most of the screws & many parts for a 211.

page0096.pdf

Edited by CowboyBob

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...