How to adjust Cobra class 4 outer presser foot down

[JAM]

I need to stitch some webbing straps together on my Cobra class 4 and  to my surprise the outer presser foot won't go all the way down to hold the material in place. I don't know if I inadvertently changed something or if it's always been that way and I never noticed, but now I need to know how to adjust the height of the outer presser foot. The documentation says something about a "banana slider" but I can't locate that on the machine so it didn't help. 

This can't be a difficult adjustment to make, but I can't find it. Help? 

[1hp]

[JAM]

Thank you!  That's very clear. While waiting I took the face plate off, sprayed a lot of WD-40 up and down the rod, then loosened all the screws that seemed to be involved, and it went thunk down to the needle plate like I wanted. It was stuck. Problem solved for the moment and your diagrams and instructions are very much appreciated. Where did you get them? They are much more useful than any of the documentation I got with my Cobra when it was new (probably 15 years ago).

[1hp]

Juki engineers manual. someone posted it on this forum.

441 Engineers manual.pdf

[jrdunn]

@1hp, I tried to download the engineers manual.  It incremented the download count but I didn't get anything.  I didn't know where the problem was.  Jim

[1hp]

just downloaded on a different computer, worked fine.

[Northmount]

2 hours ago, jrdunn said:

@1hp, I tried to download the engineers manual.  It incremented the download count but I didn't get anything.  I didn't know where the problem was.  Jim

Downloaded just fine for me.  Almost instant!

[jrdunn]

Thanks guys!  I rebooted and still can't seem to get a download.  I'm not sure why.  I've never had this problem before.  Hmm.  Maybe I'll try the Microsoft browser.

[jrdunn]

OK, we're closing on "happily ever after".  I was able to download the file with Edge.  I obviously have a problem with "Chrome".  Thank you everyone!  Jim

PS.  Also, thanks for posting the manual.