Members rfkoen Posted October 30, 2024 Members Report Posted October 30, 2024 The limiting pin on my Tandy pro press recently broke. Do any of you know what size pin is needed to replace it? Thanks in advance for your help! Quote
Contributing Member fredk Posted October 31, 2024 Contributing Member Report Posted October 31, 2024 2 hours ago, rfkoen said: The limiting pin on my Tandy pro press I have a Tandy Pro-Press and it doesn't have any such 'limiting pin' Quote
Members Arturomex Posted November 2, 2024 Members Report Posted November 2, 2024 (edited) On 10/30/2024 at 3:36 PM, rfkoen said: The limiting pin on my Tandy pro press recently broke. Do any of you know what size pin is needed to replace it? Thanks in advance for your help! Are you referring to the limiting pin that mounts in the handle? Referred to as the "stop pin" in the instruction manual? https://cdn.shopify.com/s/files/1/0063/5997/3970/files/PKG-21-003_TandyPro_Hand_Press_-_Instructions_NO_CROPS.pdf?v=1631115666 Edited November 2, 2024 by Arturomex Quote
Contributing Member fredk Posted November 2, 2024 Contributing Member Report Posted November 2, 2024 Mea culpa Caveat; my press is an earlier version in grey The pin is shanked on both sides. It is approx 5.8 mm (15/64 inch ?) on the outside (both sides) and is straight cut narrowed from approx 6.5 mm (1/4 inch ?) which goes thru the handle. It is approx 30.85 mm (1 7/32 inches ?) long, but has room to be a slightly longer Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.