Jump to content
sinneD

Oiler retrofit

Recommended Posts

Anyone retrofited an automatic oiler to a manual oiler of some kind?  I am wondering if a machine tool type one shot oiler can grafted onto the pump output so that it can be manually operated. 

The Bijur autp/manual type is common on industrial machine tools. There are other manual types and knock offs, but basically a resivoir, piston pump and actuation lever dispenses oil via a capilary tube distribution system.  

Admittedly, I am new to the world of industrial walking foot machines but am familar with ones I described. I am worried my slow, baby step sewing habits wont provide enough speed to properly lube the machine. 

thanks

sinneD 

 

 

Share this post


Link to post
Share on other sites

(Relatively) slow speed sewing, that's why many (most?) of us manually oil their machine regardless of having an auto oiler. 

Share this post


Link to post
Share on other sites

but what do you of the machine is already set up with a pump and auto?

I was trying to figure out what I could graft onto the existing oiling system to reuse the existing oil plumbing

Share this post


Link to post
Share on other sites

Simple, just ignore it and learn which parts of the machine need oiling and do it manually with a fine oiler. I had an auto oiler machine for a little while and just oiled it manually. Basically, just oil any parts that move against each other with a drop or two every so often, it's no big deal and that is how most on here look after their machines.

Share this post


Link to post
Share on other sites
5 hours ago, dikman said:

Simple, just ignore it 

THANK YOU!

Share this post


Link to post
Share on other sites
6 hours ago, sinneD said:

but what do you of the machine is already set up with a pump and auto?

I have a little Juki 1181N that has an oil pump but like @dikman I do manually oil the machine. The problem with a lot of machines that have an oil pump is we don't run them flat out and at slow speed the pump probably does provide proper lubrication. To combat that when I need to use that machine I always first remove the thread from the needle lift the presser foot up and run the machine for a couple of minutes at a slow speed then gradually increasing the speed to a fairly high rpm.

kgg 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...