Jump to content

Recommended Posts

  • Members
Posted (edited)

Does anyone know the correct bolt and thread pitch for the crank handle on the balance wheel of a 29k51?   Yes I know I can retap to any size, I just don’t wanna go that route.   I moved the balance wheel to the front and just want to be able to use the handle.  Thanks for any help.    Not my picture however the bolt I am looking for.  

IMG_8299.jpeg

Edited by SingerDad
  • Members
Posted

The screws are still available.  The singer screw # is SS135D or can be found with parts number 412845 sometimes.

This is a UK dealer but you will find it in  the US as well

https://www.college-sewing.co.uk/ss135d-spindle-singer-29k-71.html

  • Members
Posted
9 minutes ago, Constabulary said:

The screws are still available.  The singer screw # is SS135D or can be found with parts number 412845 sometimes.

This is a UK dealer but you will find it in  the US as well

https://www.college-sewing.co.uk/ss135d-spindle-singer-29k-71.html

Thank you for your quick reply.  Yes you are correct as to the part number.  Was taking a shot in the dark for the actual thread pitch.   You are appreciated 

  • Members
Posted

The pitch of the bolt is 9/32"x 28.  I am out of bolts at this time.  

glenn

  • Members
Posted
7 hours ago, shoepatcher said:

The pitch of the bolt is 9/32"x 28.  I am out of bolts at this time.  

glenn

Thank you Glenn!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...