Crank handle for Singer 29k51

[SingerDad]

Does anyone know the correct bolt and thread pitch for the crank handle on the balance wheel of a 29k51?   Yes I know I can retap to any size, I just don’t wanna go that route.   I moved the balance wheel to the front and just want to be able to use the handle.  Thanks for any help.    Not my picture however the bolt I am looking for.  

Edited Monday at 02:06 PM by SingerDad

[Constabulary]

The screws are still available.  The singer screw # is SS135D or can be found with parts number 412845 sometimes.

This is a UK dealer but you will find it in  the US as well

https://www.college-sewing.co.uk/ss135d-spindle-singer-29k-71.html

[SingerDad]

9 minutes ago, Constabulary said:

The screws are still available.  The singer screw # is SS135D or can be found with parts number 412845 sometimes.

This is a UK dealer but you will find it in  the US as well

https://www.college-sewing.co.uk/ss135d-spindle-singer-29k-71.html

Thank you for your quick reply.  Yes you are correct as to the part number.  Was taking a shot in the dark for the actual thread pitch.   You are appreciated 

[shoepatcher]

The pitch of the bolt is 9/32"x 28.  I am out of bolts at this time.  

glenn

[SingerDad]

7 hours ago, shoepatcher said:

The pitch of the bolt is 9/32"x 28.  I am out of bolts at this time.  

glenn

Thank you Glenn!