Members Toddo Posted May 14 Members Report Posted May 14 (edited) You ever see a cool concho that you wish was a snap? I ground down the outer head of the concho screw to fit inside the snap head with a bench grinder and some filing. All it would need is a small drop of red locktight to make it permanent. This is going on the next knife sheath I make. Edited May 14 by Toddo Quote
Contributing Member fredk Posted May 14 Contributing Member Report Posted May 14 Tandy used to sell packs of 10 adapters to change conchos to snaps. No work need other than the usual screwdriver Quote Al speling misteaks aer all mi own werk..
Members Toddo Posted May 14 Author Members Report Posted May 14 On 5/14/2025 at 2:23 AM, jrdunn said: Good idea! Expand 👍 On 5/14/2025 at 1:33 PM, fredk said: Tandy used to sell packs of 10 adapters to change conchos to snaps. No work need other than the usual screwdriver Expand Oh really? I'd like to get my hands on those screws. That was a bit if work getting that screw to fit inside that snap head. Like you really had to want to make it happen to do all that work. Quote
Contributing Member fredk Posted May 14 Contributing Member Report Posted May 14 I see they still do the packs https://tandyleather.eu/en-gb/products/concho-snap-adapter-10-pack Quote Al speling misteaks aer all mi own werk..
Members Toddo Posted Friday at 11:14 PM Author Members Report Posted Friday at 11:14 PM On 5/14/2025 at 6:55 PM, fredk said: I see they still do the packs https://tandyleather.eu/en-gb/products/concho-snap-adapter-10-pack Expand Sweet. I'm going to order a pack and see if those screws fit the conchos I have. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.