Jump to content
Sign in to follow this  
pete

making belts- need tips

Recommended Posts

It's been a billion years since I made belts. A friend wants a tooled 1 3/8" belt with a trophy buckle, no tip and no keeper (no taper) but doesn't want it so long that the tip hangs or looks bad.

He is 39" from the bend to the most used hole. How long should I make the standing part?

thanks

pete

Share this post


Link to post
Share on other sites

Hi Pete

For trophy buckles I have always used 7 1/2" from the most used hole which is usually the center hole with 3/4" spacing.

This works well as it allows the front loop on the jeans to be the keeper and the excess is minimal so you get no flop or twist. It also leaves just enough to add a tip if he desires at a later date.

Blake

Share this post


Link to post
Share on other sites

Pete,

From the measurement you have, you will need to know two more measurements. You will need the length from the hook on the buckle to the heel. This may be up to 4" on a monster trophy buckle with a standard hook, or only 1-1/2 or 2" on a "reverse hook" buckle. This plus the 39" you already have should give you the measured waist size. Then you will need to add the amount he wants the tip of the belt to extend past the fold (overlap).

I make most of my belts to the measured waist size and then add the overlap they want. A shorter overlap may be 2", I like 3-1/2" personally. I then punch the holes if they bring me the buckle, or send it unpunched for them to punch to fit. Most of my customers have or have access to a leather punch. When I was wholesaling belts I never punched them, the sellers punched them to fit the buckle. This allowed them to custom fit for the guy who wanted 2" overlap, or the kid who liked 6" with the strap of appropriate length.

If they are prepunched and the buyer likes a shorter overlap and has a short buckle, then they have 4 holes past the buckle tip. Looks like they have progressivley gained weight and are in the last hole. Kind of a vanity thing, but many folks don't like to appear that way.

Bruce Johnson

Share this post


Link to post
Share on other sites

thanks Blake. I really appreciate it.

ps. about 2" for the fold and snaps/chicago screws?

pete

Share this post


Link to post
Share on other sites

Hi Bruce

I like your method, It is certainly safer and more accurate. I may never pre punch another belt again.

Blake

Share this post


Link to post
Share on other sites
thanks Blake. I really appreciate it.

ps. about 2" for the fold and snaps/chicago screws?

pete

CORRECT.

Blake

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...