JohnD Posted April 30, 2007 Report Posted April 30, 2007 Does anyone know where I might find a punch to cut the hole in the end of a guitar strap? I've searched the web for "keyslot punch" and "guitar strap button hole punch" among other things but have had no luck. I would appreciate any help. Thanks John Quote (rdb):God looked down at the world, and said "See, right there in Witchita, next to the railroad tracks, I didn't put enough dandelions".
Moderator Johanna Posted April 30, 2007 Moderator Report Posted April 30, 2007 That was probably done with two round punches and an extemely sharp knife for the slit. I doubt that was done with a slot punch because they are not generally made that narrow, and they don't slice as clean. Johanna Quote You cannot depend on your eyes when your imagination is out of focus. - Mark Twain
JohnD Posted April 30, 2007 Author Report Posted April 30, 2007 (edited) Thanks for the response Johanna. I did a little more searching and found a pippin punch from Osborne tools. It punches the larger hole and the slot at once. I can't find anywhere to buy one yet. I'll keep looking though and post anything I find, in case someone may be interested also. Edited April 30, 2007 by JohnD Quote (rdb):God looked down at the world, and said "See, right there in Witchita, next to the railroad tracks, I didn't put enough dandelions".
nomi Posted April 30, 2007 Report Posted April 30, 2007 A possible source for the punch http://www.hidehousesouth.com/Tools/punchs.htm - Noel Quote
JohnD Posted April 30, 2007 Author Report Posted April 30, 2007 Thanks for the tip, Noel I'll give them a call tomorrow when they're open. John Quote (rdb):God looked down at the world, and said "See, right there in Witchita, next to the railroad tracks, I didn't put enough dandelions".
Moderator Johanna Posted April 30, 2007 Moderator Report Posted April 30, 2007 Noel! JohnD...I have never seen a tool like that before...pardon my ignorance. I love this place, I learn something new every day. Does Osborne still make them, and what are they called? Johanna Quote You cannot depend on your eyes when your imagination is out of focus. - Mark Twain
Contributing Member ClayB Posted April 30, 2007 Contributing Member Report Posted April 30, 2007 Thanks for the tip, Noel I'll give them a call tomorrow when they're open. John Siegel of California also has the punch with one hole and the slot. https://www.siegelofca.com/view_cat_product...id=43&curpage=3 Quote ClayB Badlands Leather Art blog Badlands Leather Art Website
nomi Posted April 30, 2007 Report Posted April 30, 2007 Noel!JohnD...I have never seen a tool like that before...pardon my ignorance. I love this place, I learn something new every day. Does Osborne still make them, and what are they called? Johanna The website I found called them a Pippin (keyhole) Punch. It was a new tool to me, never seen one before And thanks for the welcome! - Noel Quote
Moderator bruce johnson Posted April 30, 2007 Moderator Report Posted April 30, 2007 John, The Osborne button hole or "pippen" punches only come with one sized hole. One has a round hole and the other has a teardrop shape hole. It may not be the same size as the guitar button. Johanna's suggestion of the round punch and cutting the slot may still be necessary. The Osborne button punch holes are just a bit small for some of the things I do that cut on (spur straps). I use a round punch for the hole, and instead of a knife, I punch the slit with a sharpened wood chisel. I bought a cheap set of wood handled wood chisels several years ago, and they are all still going strong. I hit them with a maul against a LDPE cutting board. I sharpened them to a finer taper than they came with, but still left the single bevel. I use the different sizes (widths) to cut inlays too, especially long straight lines. On inside corners they prevent overcutting and bad words. Safer and more repeatable cutting than a knife for me in some places. Bruce Johnson Quote Bruce Johnson Malachi 4:2 "the windshield's bigger than the mirror, somewhere west of Laramie" - Dave Stamey Vintage Refurbished And Selected New Leather Tools For Sale - www.brucejohnsonleather.com
BruceGibson Posted April 30, 2007 Report Posted April 30, 2007 Brilliant use of wood chisels...I'm stealing that, Bruce. Hope you don't mind buddy! Quote "Don't squat with your spurs on." www.GibsonLeather.com
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.