CowboyBob Posted 9 hours ago Report Posted 9 hours ago 58 minutes ago, friquant said: How much is a new stitch length cam? I've never had a main shaft out...is that straightforward to do? $75.00 w/shpg.the shaft can be hard to get out you need to sand it lightly as it gets rust & dirt on it.Then oil it so it slides out easier. Quote Bob Kovar Toledo Industrial Sewing Machine Sales Ltd. 3631 Marine Rd Toledo,Ohio 43609 1-866-362-7397
Contributing Member friquant Posted 1 hour ago Author Contributing Member Report Posted 1 hour ago On 8/18/2025 at 9:17 AM, kgg said: I would get a wire brush and scrap all round the unit particularly around the feed eccentric seam and then add a few drops of good old fashion diesel around the feed eccentric seam. A few hours sitting with a few drops of diesel made a difference! I'm gonna throw away my penetrating oil 😜 I've got 2.5 turns each way now. How many turns should I expect when it's fully loosened up? Quote friquant. Like a frequent, piquant flyer. Check out my blog: Choosing a Motor for your Industrial Sewing Machine
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.