Members ben27 Posted 9 hours ago Members Report Posted 9 hours ago Hi all! I just registered on the forum. I have a Pfaff 145 and just bought a servo motor. The v belt that I had is now too long. it is an optibelt 10x1060. I tried measuring with a string and ended up with 97-99 cm inner diameter. Is there a way to keep using this belt? And if not, what belt do you recommend? Any people with experience with this clutch to servo swap? Thanks a lot! Quote
kgg Posted 7 hours ago Report Posted 7 hours ago 2 hours ago, ben27 said: The v belt that I had is now too long. I would go to your local hardware / auto store and see what they have. If the new one is to short / long exchange it for another. kgg Quote Juki DNU - 1541S, Juki DU - 1181N, Singer 29K - 71(1949), Chinese Patcher (Tinkers Delight), Warlock TSC-441, Techsew 2750 Pro, Consew DCS-S4 Skiver
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.