Landis 3 wax pot seal

[speedybri]

Hello everyone.  

I'm in the process of cleaning up an old landis 3.  Does anyone know if the rubber seals for the campbell randall wax pots will work for the landis 3 one?   The campbell seals are the only ones I seem to find.  

Thanks you much. 

Brian Merrick  

 

[Cumberland Highpower]

I don't have a Landis 3 to compare to....Although I'd gamble they might be similar to what's in a Landis 16?  The Landis Amishman in McCleansboro IL has strippers for the 16. I think the're kinda pricey for what they are.  Long ago I was cheap and just made my own from blocks of rubber.  I got the best results from just taking a block of 1/2" 40 durometer rubber and greasing it up real good and using a punch of the right diameter. one good whack and a cylinder shaped piece pops right out.  Put in the wax pot and just lightly tighten it down.  Use a small awl or really thin/fine nail sharpened real sharp to poke a hole while it's in the guide.

Edited 19 hours ago by Cumberland Highpower

[MikeRock]

Eli Schlabach (217) 543-3464.  Landis Sales & Service is located at 115 E CR 500 N, Arthur, IL 61911. This location is in Douglas County.