Members speedybri Posted October 26 Members Report Posted October 26 Hello everyone. I'm in the process of cleaning up an old landis 3. Does anyone know if the rubber seals for the campbell randall wax pots will work for the landis 3 one? The campbell seals are the only ones I seem to find. Thanks you much. Brian Merrick Quote
Members Cumberland Highpower Posted October 28 Members Report Posted October 28 (edited) I don't have a Landis 3 to compare to....Although I'd gamble they might be similar to what's in a Landis 16? The Landis Amishman in McCleansboro IL has strippers for the 16. I think the're kinda pricey for what they are. Long ago I was cheap and just made my own from blocks of rubber. I got the best results from just taking a block of 1/2" 40 durometer rubber and greasing it up real good and using a punch of the right diameter. one good whack and a cylinder shaped piece pops right out. Put in the wax pot and just lightly tighten it down. Use a small awl or really thin/fine nail sharpened real sharp to poke a hole while it's in the guide. Edited October 28 by Cumberland Highpower Quote
MikeRock Posted October 29 Report Posted October 29 Eli Schlabach (217) 543-3464. Landis Sales & Service is located at 115 E CR 500 N, Arthur, IL 61911. This location is in Douglas County. Quote
Members speedybri Posted 6 hours ago Author Members Report Posted 6 hours ago On 10/28/2025 at 4:01 PM, Cumberland Highpower said: I don't have a Landis 3 to compare to....Although I'd gamble they might be similar to what's in a Landis 16? The Landis Amishman in McCleansboro IL has strippers for the 16. I think the're kinda pricey for what they are. Long ago I was cheap and just made my own from blocks of rubber. I got the best results from just taking a block of 1/2" 40 durometer rubber and greasing it up real good and using a punch of the right diameter. one good whack and a cylinder shaped piece pops right out. Put in the wax pot and just lightly tighten it down. Use a small awl or really thin/fine nail sharpened real sharp to poke a hole while it's in the guide. Thank you! On 10/28/2025 at 11:08 PM, MikeRock said: Eli Schlabach (217) 543-3464. Landis Sales & Service is located at 115 E CR 500 N, Arthur, IL 61911. This location is in Douglas County. I called him. He's sending a set. Thank you! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.