Members J Kellar Posted Monday at 05:44 PM Members Report Posted Monday at 05:44 PM I have a few questions regarding machines. I mostly sew wallets, belts, and knife cases, but I would also like to do bags at some point. As far as belts and sheaths go, I use Hermann Oak Saddle Skirting Leather. Should I use 207 or 277 size thread, or both? Is the Cowboy 797 from Tandy powerful enough to sew through 2 layers of 10-11 oz Hermann Oak without pre-punching the holes? If not, what machine should I look for? I've looked at the CB3200 and the Cobra Classes 3 and 4 sewing machines, but those are a tad out of my budget for now. Quote
AlZilla Posted Monday at 06:14 PM Report Posted Monday at 06:14 PM You'll get plenty of good feedback here. For the moment, let me direct you to an epic thread on this very subject that should get you started: Quote “Those who can make you believe absurdities can make you commit atrocities.” - Voltaire “Republics decline into democracies and democracies degenerate into despotisms.” - Aristotle
Contributing Member friquant Posted 23 hours ago Contributing Member Report Posted 23 hours ago On 12/8/2025 at 12:44 PM, J Kellar said: I have a few questions regarding machines. I mostly sew wallets, belts, and knife cases, but I would also like to do bags at some point. What machine should I look for? I've looked at the CB3200 and the Cobra Classes 3 and 4 sewing machines, but those are a tad out of my budget for now. What machines are you sewing with now? What kind of triple feed machines come up often in your local marketplace ads? Quote friquant. Like a frequent, piquant flyer. Check out my blog: Choosing a Motor for your Industrial Sewing Machine
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.