Setting up & organizing the work bench

[cspeedyrun]

I have been dabbling in leatherwork for years, but never took it seriously or to the next level.  Recently, I've found I have more time on my hands, and I want to get serious about improving my skills.  Years ago, my father built me a great workbench to put in my tack room, but I just had tools randomly stored in the drawers.  I've taken the time to sort things out and grouped my tools into "categories" (for a lack of a better term). 

Here's my question to all of you...

How would you arrange these "categories" in your bench drawers?  

• Sharpening
• Measure
• Cutting
• Skiving
• End Punches
• Press Punches
• Hole Punches
• Tooling
• Dying
• Gluing
• Zipper Setters
• Stitching (Hand)
• Thread (both hand & machine)
• Edger's & Groover's
• Burnishing
• Hardware Setting
• Miscellaneous (like a thread spool holder, belt trimmer, etc.)
• Stitching Pony's (small item only, not my large one)

Keep in mind that I have hardware and stamping tools in dedicated spots on top of my bench.

Thanks in advance for any and all suggestions!

 

Edited 14 hours ago by cspeedyrun
Took out pics that showed up as attachments

[DieselTech]

I found it easier & more efficient for me, to have my most used tools hanging on a tool board or in tool holders/racks on the back side of the bench. 

I keep the stuff i use the least amount in the drawers.

[BlackDragon]

It's really going to depend on what you do the most. If you do a lot of tooling then your stamps and mauls should be easiest to access on your bench. I use drawers for storing supplies and things I don't often use.

I have stations.

I have a dedicated tooling bench where I do tooling and the occasional hand stitching.

I have a large station where I can roll out a side to cut. My knives are usually sitting on my cutting board. I do most of my layouts and design work on here as well.

I have a hardware area where I do things like rivets and anything that requires a little more aggressive work.

I also have a dye area where I do any wet work.