Members Majorpixel Posted yesterday at 10:38 AM Members Report Posted yesterday at 10:38 AM I have found and cleaned up a pdf of the manual for the 168w101 post stitch machine. I have attached it for anyone that may want it. Singer168W101.pdf Quote
AlZilla Posted yesterday at 02:13 PM Report Posted yesterday at 02:13 PM That's a nice score, both Using and Adjusting. Nice of you to contribute. Quote “Those who can make you believe absurdities can make you commit atrocities.” - Voltaire “Republics decline into democracies and democracies degenerate into despotisms.” - Aristotle
Moderator Wizcrafts Posted yesterday at 03:48 PM Moderator Report Posted yesterday at 03:48 PM @Majorpixel Thank you very much! I have a 168 post machine. For those who don't know, it is a full compound feed walking foot machine based on the Singer 111 series. It uses the same G size (1x) bobbins as the 111 and 211 walking foot machines. It can sew up to 3/8 inch with up to #138 bonded thread. It uses standard system 135x16 and 135x17 needles. The post is about 7 inches tall and the throat plate is cut very close to the left edge. These machines are used to bulid hats and other round items that need to hang down on both sides of the machine. The stitch length adjuster is the old style knob in the back of the balance wheel. Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Members Majorpixel Posted yesterday at 09:07 PM Author Members Report Posted yesterday at 09:07 PM Had some trouble getting it to print, so I ran it through a text unblurrer. Might be some typos in this one. Upscaled 168w101 Manual.pdf Quote
Members Majorpixel Posted 3 hours ago Author Members Report Posted 3 hours ago (edited) @Wizcrafts I have very nearly restored my 168, but I'm having some trouble with getting the bobbin to rotate. I think I'm missing the hook drive shaft screw, but I'm not sure how/ where that slots in. I found this diagram for reference. I think I am missing 20055H (Which I am having a hard time finding a replacement for) and 264049 seems to be loose since the gears aren't meshing fully unless I press them together. Any advice or pictures you could share of your machine? Full list of parts attached as well for those interested. Singer 168W101-1 Bobbin Part list.pdf Edited 3 hours ago by Majorpixel Forgot to @ Quote
Moderator Wizcrafts Posted 1 hour ago Moderator Report Posted 1 hour ago @CowboyBob Can you help this member with some parts for his Singer 168? Quote Posted IMHO, by Wiz My current crop of sewing machines: Cowboy CB4500, Singer 107w3, Singer 139w109, Singer 168G101, Singer 29k71, Singer 31-15, Singer 111w103, Singer 211G156, Adler 30-7 on power stand, Fortuna power skiver and a Pfaff 4 thread 2 needle serger.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.