Spring Medal Belt Clips for Law Enforcement Badge Carrier

[Buck65102]

Looking to find a source for spring metal clips that go into the back of a law enforcement badge carrier to clip the carrier to a leather belt. Tandy and others have ones that have a hole for a rivet at the bottom, but looking for one that has a raised "hump" area at the bottom rather than the hole,to fit into a slot cut into the back of the badge carrier. I have several old badge carriers that have this type of clip, but can't seem to locate a supplier. Any help appreciated.

Buck

[Randy Cornelius]

Ohio Travel Bag has what you want. but as a cop for 28 years I use the ones with the hole for the rivit.

Randy

[Buck65102]

Ohio Travel Bag has what you want. but as a cop for 28 years I use the ones with the hole for the rivit.

Randy

Thanks for the advise and identifying a supplier. I was afraid that the ones with the hole for the rivet or Chicago Screw would be too long for the badge carrier, but may give your suggestion a try. Would a Chicago screw work, or have you found rivets to work better?.

[HDL]

Contact CDL springs 626-443-0088 they make them for the big guys like Bianchi. He only wants to sell larger quanties. If he can not help contact me I can sell you some. highdesertleather.com Thanks Tim

[Todd]

Use the rivets as chicago screws have a tendency to back out and you don't want to lose that badge.

[sheathmaker]

Tandy/LF does have them. See link below

http://www.tandyleatherfactory.com/home/de...avlocation=left

Paul

[kevinhopkins]

Hi... I think I have what you need. either black or nickel. Kevin@springfieldleather.com