Buck65102 Report post Posted April 1, 2009 Looking to find a source for spring metal clips that go into the back of a law enforcement badge carrier to clip the carrier to a leather belt. Tandy and others have ones that have a hole for a rivet at the bottom, but looking for one that has a raised "hump" area at the bottom rather than the hole,to fit into a slot cut into the back of the badge carrier. I have several old badge carriers that have this type of clip, but can't seem to locate a supplier. Any help appreciated. Buck Quote Share this post Link to post Share on other sites
Randy Cornelius Report post Posted April 1, 2009 Ohio Travel Bag has what you want. but as a cop for 28 years I use the ones with the hole for the rivit. Randy Quote Share this post Link to post Share on other sites
Buck65102 Report post Posted April 1, 2009 Ohio Travel Bag has what you want. but as a cop for 28 years I use the ones with the hole for the rivit. Randy Thanks for the advise and identifying a supplier. I was afraid that the ones with the hole for the rivet or Chicago Screw would be too long for the badge carrier, but may give your suggestion a try. Would a Chicago screw work, or have you found rivets to work better?. Quote Share this post Link to post Share on other sites
HDL Report post Posted April 8, 2009 Contact CDL springs 626-443-0088 they make them for the big guys like Bianchi. He only wants to sell larger quanties. If he can not help contact me I can sell you some. highdesertleather.com Thanks Tim Quote Share this post Link to post Share on other sites
Todd Report post Posted April 8, 2009 Use the rivets as chicago screws have a tendency to back out and you don't want to lose that badge. Quote Share this post Link to post Share on other sites
sheathmaker Report post Posted April 8, 2009 Tandy/LF does have them. See link below http://www.tandyleatherfactory.com/home/de...avlocation=left Paul Quote Share this post Link to post Share on other sites
kevinhopkins Report post Posted April 9, 2009 Hi... I think I have what you need. either black or nickel. Kevin@springfieldleather.com Quote Share this post Link to post Share on other sites
