Members jbird Posted June 22, 2009 Members Report Posted June 22, 2009 Howdy all Got a question for you I thinking of anding silversmith to my resume and I need some tips on were to get ingraving tools and all tools needed any help will be great thanks Josh Quote
Members TroyWest Posted June 22, 2009 Members Report Posted June 22, 2009 Howdy allGot a question for you I thinking of anding silversmith to my resume and I need some tips on were to get ingraving tools and all tools needed any help will be great thanks Josh www.grstools.com Quote
MarkB Posted June 22, 2009 Report Posted June 22, 2009 Howdy allGot a question for you I thinking of anding silversmith to my resume and I need some tips on were to get ingraving tools and all tools needed any help will be great thanks Josh Josh You could PM Ken1963. He is a silversmith and would be able to help you also. He uses GRS tools too. Mark Quote
Members jbird Posted June 22, 2009 Author Members Report Posted June 22, 2009 Thanks guys That's what I needed Josh Quote
Members hiloboy Posted June 22, 2009 Members Report Posted June 22, 2009 (edited) Josh, I have been doing engraving now for almost 30 years.. i use GRS tools vary good tools.. but maybe for the last 8 years i have used Steve Lindsay tool.. both are good tools.. here are a couple site you may want to look at to learn more about engraving. http://www.igraver.com/forum/ i hope this help. http://airgraver.com/Hand_Engraving_Tools_Overview.htm http://www.engravingforum.com/index.php? Edited June 22, 2009 by hiloboy Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.