First shoulder holster

[Shorts]

A friend asked me to build him a conceal carry shoulder rig. He says he doesn't mind being a guinea pig. He needs it to carry 2 separate guns, semi & revolver (read: holster must be modular).

Works for me.

I'm going to have this thread as a running build because I have tons of questions about each portion of this rig.

Right now I'm building a mock-up with scraps so I can get a feel for the process. I want to take it with me on Sunday to the range to give him an idea of how his will be fashioned.

First part, central back 'X' and shoulder straps:

^^ like how I bounce my maker's stamp for a nice blurred effect?

^^ This X has what I imagine are plenty of priorities. Strength, flexibility and comfort.

Strength - needs to be durable not to fall apart

Flexibility - each strap joint needs to pivot to move with the wearer

Comfort - comfort, not pokey or itchy or sharp or annoying or....just comfortable

This X and 4 straps are from 4/5oz scraps. I thought that they'll be flexible enough and strong enough without being too heavy. Is that going to help? Hurt? Comments?

You'll see I used Segma Snaps to joint the X and straps. I'm not intending this as the final hardware. Why I used them is because I want the joint to be able to pivot and the Segma snaps allow that (and that's what I have that works right now). Since it is mock-up, I need the function first. So my next question, what hardware should I be using here? I don't need the straps to be removable from the X. A more permanent joint seems acceptable. The hardware must be low profile for comfort and concealment. Ideas?

As for the rest of the strap, they are made to length, plus a plethora of holes for adjustable length, secured with a chicago screw. Straps are 1" width of 4/5oz.

Next plan of action is stitching the holster and mag pouch pieces. Holster will sit horizontally, mag pouch vertically (opening down)

What weight of leather should I use? Do I go with the regular 7/8oz? It is a holster afterall.

On each part I'm planning to utilize ears on top and bottom of the holster. The top ears will attach to the straps via Dring, and the bottom ear with attach to the stabilizer strap that goes to the belt.

I have not worked out details yet on how I want that. But I am thinking of putting DOT snaps on these ears and use that as the method of attachment through the Dring. Remember, the holster must be modular so that it can be worn with either gun. I will be making a specific holster for each gun.

Well that's it for now I guess. I'm off to the store to find some mockup Drings and elastic webbing. My OTB and Weaver catalogs are en route and I want to order good hardware from one of those places for all rigs here after.

Thanks yall!

[troop]

very interested in your set up. i have people hitting me up for shoulder rigs as well. i have to put them off until i have the time to start working on one. i was thinking of using 2/3 oz leather for the straps and 6/7 for the holster and ammo pouch. 7/8 would be fine though.

i carry a shoulder rig myself at work so i kind of have an idea of what i would do differenty. (not very much) i wouldn't dye the inside of the straps as the dye, no matter how well it's done will bleed some onto your shirts over time. i wear dress shirts and that ain't cool.

other than that you sound like you have it down. i was kinda worried however when i saw the segma snaps before reading the explanation. lol

i'll be very interested in seeing it progress.

[STBY]

Hi Monica,

I'm Mike and I have been around guns, military and law enforcement for awhile and have made many a holster/duty rigs for friends. So here are my .02 cents. First, the person your making it for are they small, medium or large framed? Second what size semi auto and revolver will be carried, barrel length? You mention carrying the gun horizontal, well if the person is small in stature and they want to carry a full size .45 1911 or 1911 long slide (6" barrel) or a revolver with a long barrel it will protrude out the back making it look obvious that they are carrying. Vertical or horizontal, I have done a slight 20-25 degree angle off of vertical which is nice and comfortable for carry and easy to draw the gun. Horizontal will also require a good retention device so it does not fall out, can't have a nice snug friction fit like on a belt holster, as the person goes to draw and the gun is stuck. You may already know that you will need to add buckles so the person can adjust the straps and also add one strap on the bottom of each holster that they can attach to their belt so the holsters do not flop around when walking or if they are a cop, chasing a bad guy. Hope this was helpful.

[Shorts]

very interested in your set up. i have people hitting me up for shoulder rigs as well. i have to put them off until i have the time to start working on one. i was thinking of using 2/3 oz leather for the straps and 6/7 for the holster and ammo pouch. 7/8 would be fine though.

i carry a shoulder rig myself at work so i kind of have an idea of what i would do differenty. (not very much) i wouldn't dye the inside of the straps as the dye, no matter how well it's done will bleed some onto your shirts over time. i wear dress shirts and that ain't cool.

other than that you sound like you have it down. i was kinda worried however when i saw the segma snaps before reading the explanation. lol

i'll be very interested in seeing it progress.

Thanks troop. You have what I don't but wish I did - perspective and experience wearing a shoulder rig. I've not the first clue what I'd do or change to make mine acceptable lol I do have 6/7oz available. It probably be a little more comfortable than the 7/8oz under there.

Yeah, glad you caught the explanation on the segma snaps. While I'd wear them on my belt, I won't put them in such a critical CCW area. I guess the last thing you'd need is the thing unsnapping and dropping to the floor in the middle of the grocery store. That would be awkward

Good input about the dye. While its a common knowledge thing about holsters and jeans and dye rub off, staining a good dress shirt will be a bit more annoying.

[Shorts]

Hi Monica,

I'm Mike and I have been around guns, military and law enforcement for awhile and have made many a holster/duty rigs for friends. So here are my .02 cents. First, the person your making it for are they small, medium or large framed? Second what size semi auto and revolver will be carried, barrel length? You mention carrying the gun horizontal, well if the person is small in stature and they want to carry a full size .45 1911 or 1911 long slide (6" barrel) or a revolver with a long barrel it will protrude out the back making it look obvious that they are carrying. Vertical or horizontal, I have done a slight 20-25 degree angle off of vertical which is nice and comfortable for carry and easy to draw the gun. Horizontal will also require a good retention device so it does not fall out, can't have a nice snug friction fit like on a belt holster, as the person goes to draw and the gun is stuck. You may already know that you will need to add buckles so the person can adjust the straps and also add one strap on the bottom of each holster that they can attach to their belt so the holsters do not flop around when walking or if they are a cop, chasing a bad guy. Hope this was helpful.

Very, thank you.

My customer is a larger gentleman. He'll be carrying a 3.5" semiauto S&W and a snub .44spl revolver. For conceal purposes, he'll have them well hidden front to back

For retention I'm planning on a thumb break and a retention screw on the holster. I normally mold my belt holsters pretty tight. But you are certainly correct, the draw pull cannot be as tight on the shoulder rig as the belt.

Thanks!

[troop]

STBY is right about the draw angle. i carry a full size 1911 horizontal and am thinking that a cant between the horizontal and vertical would make a draw much more comfortable.

[Shorts]

I'm all ears. I'll bring this point up to my customer and see what he thinks about it.

Thanks guys!

[Lobo]

Monica:

In my experience, the X-style harness does not support weight evenly and is very prone to shifting due to the weight of the holstered handgun. Unless there is some support on the off-side (such as a strap fastening to the belt) this will be a constant irritant in use and wear.

This is one of the most difficult problems to overcome in shoulder holster design. Concealed carry does not permit one to be constantly shifting the harness every time he gets into a car, gets out of a car, bends over, or otherwise exercises the normal movements of the body. In order to function as desired, the X-style harness requires equalization of the weight on both sides of the body, and even then can permit some shifting in normal movement.

For the direction that you are heading with this project I would suggest tie-down straps on both sides to anchor the weight to the belt via the harness. Even with these added, comfort can be an elusive dream with a shoulder holster for the heavier handguns.

Best regards.

[Shorts]

Thanks Lobo, I think the tie downs are a good idea.

I'm also considering a rear horizontal strap to connect the rear straps across the back.

[Dwight]

Monica:

In my experience, the X-style harness does not support weight evenly and is very prone to shifting due to the weight of the holstered handgun. Unless there is some support on the off-side (such as a strap fastening to the belt) this will be a constant irritant in use and wear.

This is one of the most difficult problems to overcome in shoulder holster design. Concealed carry does not permit one to be constantly shifting the harness every time he gets into a car, gets out of a car, bends over, or otherwise exercises the normal movements of the body. In order to function as desired, the X-style harness requires equalization of the weight on both sides of the body, and even then can permit some shifting in normal movement.

For the direction that you are heading with this project I would suggest tie-down straps on both sides to anchor the weight to the belt via the harness. Even with these added, comfort can be an elusive dream with a shoulder holster for the heavier handguns.

Best regards.

Lobo has some good points, . . . especially the shifting problem, . . . but I was successful in overcoming it without resorting to tie downs.

The first shoulder rig I had, I bought, . . . and it had probably 1 to maybe 1 1/8 wide straps of 6 oz leather for the "X" strapping. I gave it away.

I then used some of the ideas there to make my shoulder holster that I still have and use.

It is a horizontal carry, thumb break, and I purposely pulled it up close under my left arm, and allowed the off hand to hang a bit lower (after trial and error, found this works well for me), . . . and the off hand is a double mag pouch that opens down and carries two ea. 8 rd mags.

My straps are suede, . . . tend to widen at the top of the soulders to almost 2 inches and narrow as they approach the holster or mag pouch.

I have never needed any kind of belt strap, . . . it does not shift or move, . . . and I carry a full size RIA 1911, all steel, w/9 rounds in it.

I also used a round piece of 5 oz leather for my attachment point in the back, . . . using 24 line snaps from Tandy, . . . it has never come apart, . . . and swivels nicely as it needs to.

I also did not mold the holster, but lined it with suede (sewn, . . . not cemented) and just "crumpled" the leather a bit before I put it all together so the holster leather is a bit softer and more pliable. Makes for easier holstering and drawing.

May God bless,

Dwight

Edited June 27, 2009 by Dwight