Members TexasJack Posted October 15, 2009 Members Report Posted October 15, 2009 Thought I'd try a case for a new phone. (My now-dead phone was a flip-type that fit in my pocket.) So I came up with a simple design and built a prototype. The idea was to sew the seams and then reverse the whole thing. But when I flipped it inside out, the seams look terrible. I suspect I'm missing a step and thought I'd ask for some directions. Should I be creasing the seam first? Quote
Contributing Member barra Posted October 15, 2009 Contributing Member Report Posted October 15, 2009 Texasjack. It's a bit hard to see what you mean without a pic but generally a seam will need to be "dressed". This means that you will need to rub them flat or if the leather is a bit thicker you can gently tap the seam with a hammer. Barra Quote "If You're not behind the Troops, please feel free to stand in front of them"
Moderator Art Posted October 15, 2009 Moderator Report Posted October 15, 2009 Hi TJ and Barra, Another way is to put a corded welt in the seam which is used to hide the stitches (or cover-up a multitude of sins). Art Texasjack. It's a bit hard to see what you mean without a pic but generally a seam will need to be "dressed". This means that you will need to rub them flat or if the leather is a bit thicker you can gently tap the seam with a hammer. Barra Quote For heaven's sakes pilgrim, make yourself a strop!
Members TexasJack Posted October 17, 2009 Author Members Report Posted October 17, 2009 Yeah, I've got to dig out the camera (that I carefully put away somewhere....) The only things I've worked on - like sheaths and holsters - have visible seams. Those who make bags and purses and such no doubt understand the nuances of reversing the seam much more than me. And you make it look easy. So when I saw phone cases selling for $40, I thought, "Why should I spend the money? I should be able to do that." First problem was not having a pattern to start with. But I had seen the ones in the phone store, so I could generate something close. I made a wooden block for a form. (It never bothered me if a little water made it through the plastic cover onto a knife, but I suspect the phone might be hard to dry out.) I dug out a piece of scrap leather to make a prototype and roughed out the design and did a quick job of sewing it. The instant I flipped it, I realized something was missing from my knowledge database. But that's OK. Part of the fun of life is learning new things. Quote
Members TexasJack Posted October 23, 2009 Author Members Report Posted October 23, 2009 OK, found the camera. As you can see, I really roughed out a design on a piece of scrap leather. If you look at the seam after it was inverted, you can see how really, really bad it looks. True, I didn't spend a lot of time trying to get the seam really straight. If I understand the earlier response, I need to wet and rub the seam very flat. Or use a corded welt. (Covering a multitude of sins sounds pretty attractive to me, BTW!) Or, go with a different design. After going this far, I hate to give it up before I understand what I'm doing wrong. Quote
Members ChuckBurrows Posted October 23, 2009 Members Report Posted October 23, 2009 (edited) Hola TJ - give me a call sometime and I'll be glad to esplain (Tex/Mex for explain) what you done "wrong" and how to fix it - BTW I heard from our mutual amigo Major JT a while back....phone number is 970-259-8396 would be good to talk at you....... Edited October 23, 2009 by ChuckBurrows Quote Wild Rose Trading Company Two roads diverged in a wood, and I, I took the one less traveled by, And that has made all the difference.
Moderator Art Posted October 23, 2009 Moderator Report Posted October 23, 2009 Hi TJ, You need to skive the seams back to get some of the bulk out to use that method. Thick leather doesn't fold very well as you have found out. Art OK, found the camera. As you can see, I really roughed out a design on a piece of scrap leather. If you look at the seam after it was inverted, you can see how really, really bad it looks. True, I didn't spend a lot of time trying to get the seam really straight. If I understand the earlier response, I need to wet and rub the seam very flat. Or use a corded welt. (Covering a multitude of sins sounds pretty attractive to me, BTW!) Or, go with a different design. After going this far, I hate to give it up before I understand what I'm doing wrong. Quote For heaven's sakes pilgrim, make yourself a strop!
Members TexasJack Posted October 24, 2009 Author Members Report Posted October 24, 2009 Yeah, Chuck, I also heard from Cap Maj J. He must have been in one of those moods this week. Quote
Members TexasJack Posted October 27, 2009 Author Members Report Posted October 27, 2009 Just wanted to say "Thanks" to Chuck Burrows for spending some quality time to help me find my way. Not only one of the most talented guys I know, but also one of the nicest. Quote
Members swinewerx Posted October 27, 2009 Members Report Posted October 27, 2009 This would be my opinion, when you either punch holes or use your four,three,two,one chisels make your lines of stitching extremely straight, and when you sew make it hurt! what that is, sew with a lot of strength to keep it tight. Get it wet when stitching as well, it helps in the form/mold process. This is in no way critisizing your things, we all learn some way or another. The difficult way is where i went and actually have slowed down with the impatience, which is great for me to do Quote Still trying to figure out what is going on out there in the custom/one off world
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.