Members Caffy Posted April 25, 2011 Members Report Posted April 25, 2011 Thanks Ray I don't know either. Bless u too! I've used olive oil with Vinegaroon. I dunno if that'd be a no-no though. I'm still too new to know. God Bless, Ray Quote
Members jeeperaz Posted April 25, 2011 Members Report Posted April 25, 2011 I've used olive oil with Vinegaroon. I dunno if that'd be a no-no though. I'm still too new to know. God Bless, Ray A commonly used combo. Quote
Members reuben cogburn Posted April 26, 2011 Members Report Posted April 26, 2011 I've never had much success trying to dip neatsfoot oil.. Everything is gunky oily, like mentioned above. I do use several applications of oil to bullets loops however, as I usually dye them before assembly and the dye tends to stiffen them to much. I also find that the neatsfoot I use seems to absorb better faster if the leather is damp.... Hope this helps more than adds to the confusion.. regards Quote Quando omni flunkus moritati
Members Kcinnick Posted November 19, 2011 Members Report Posted November 19, 2011 I know I am bringing this up from the dead, but how do you apply the oil without soaking your piece. The leather soaks up the oil like a sponge, and the only option I see to get a uniform coating is to put it on pretty heavy. Quote
Phatdaddy Posted November 19, 2011 Report Posted November 19, 2011 I know I am bringing this up from the dead, but how do you apply the oil without soaking your piece. The leather soaks up the oil like a sponge, and the only option I see to get a uniform coating is to put it on pretty heavy. I just try to use the same amount on the sheepskin or whatever I'm using get the light coat as even as possible and then let the piece sit as though it was drying and the oil generally evens itself out. Kevin Quote
Contributing Member UKRay Posted November 20, 2011 Author Contributing Member Report Posted November 20, 2011 I've experimented extensively with the neatsfoot oil bath and have finally found a way to use it. You are quite right the leather soaks it up like a sponge. However, one good thing is that leather soaked in neatsfoot is almost entirely waterproof. I have dipped some straps that are needed for cycle baskets and similar outdoor tasks (also for strapping luggage onto classic cars) and they throw off water beautifully. A solid brass buckle and brass rivets mean no rust. Useful if you need to make something that is going to get wet quite often. The big drawback is that the straps feel very oily and slippery at first, This can be eased by wrapping the straps in butcher's paper to absorb the surplus oil and then hanging he straps up somewhere warm until they dry out. I generally make about 200 straps at a time and it takes about three weeks for them to become usable/saleable, Hope this helps someone. Ray Quote "Some mornings, it's just not worth chewing through the leather straps" Ray Hatley www.barefootleather.co.uk
Members gicts Posted December 1, 2011 Members Report Posted December 1, 2011 In Bianchi's holster videos he dips them in a Neatsfoot oil bath. I'm sure everyone's milage varies depending on leather quality and age as well as the dipping variables like temp and amount and time.... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.