Parts wanted for a ULS

[Wizcrafts]

I am getting a Union Lockstitch machine (ULS) in trade for my Adler 204. The ULS has minimal accessories with it. The machine has the standard extended throat plate, a roller edge guide and closed standard pressor foot. I am looking for the following spare parts, preferably from individuals, not retail outlets.

• Needles (various sizes)
• Awls (various sizes)
• Bobbins
• Raised throat plates for holsters and pouches
• Other non-standard throat plates
• Non-standard pressor feet (e.g. left toe, right toe, open front double toe, stepping foot [5 to 8 to inch])
• loopers
• thread guides
• Swing away, non-roller edge guide
• Various springs and tension parts (esp. bobbin cover springs)
• Misc straight and tapered screws, nuts and bolts
• T-wrenches
• A users' manual
• Threading rod
• Take-up lever/spring and lifting parts that wear out
• Any other replacement parts you don't need

Let me know what parts you have laying around and how much you want for them, shipped to Flint, Michigan.

[Wizcrafts]

Thanks to Andrew Wood, I now have a manual for a Union Lockstitch machine.

I only need everything else in my previous post!

[Wizcrafts]

The following parts are from the Union Lockstitch parts list and pictures.

Looks like I will need some replacement 4-sided screws, # 5 and # 117, some shuttle screws #253, a few awl set screws #86, and maybe a needlebar and definitely a new needle set screw # 133. Other screws needed are for the brake: 2 #19, with 2 #20 nuts. I'll need a new knockoff stud #12 and these springs: #148, #241, #292.

I could use a spare pickup thread point #276, and throat plates #250F, 250N and 250G.

Also, small and a large four-sided wrenches in good condition.

I can use needle sizes 2, 3 and 4 and awl sizes 2, 3, 3 1/2, 4 and 5. Any leatherpoint awls would be a treat!

I'll post more requests as I find more worn out parts.

BTW: my machine serial number is 42xx. Does that indicate that it was built in 1942, or that it was the 42xxth machine built?

Thanks in advance. I hope someone has spare ULS parts they can let go of. PM me if you have parts to sell!

[Wizcrafts]

It turned out that my new-old Union Lockstitch machine came equipped with a custom modified stepping foot, set to about 6 wide, ugly steps to the inch. Does anybody have a flat bottom, standard pressor foot they can spare?

I also need a raised throat plate for holsters and cases. Anybody???

[CowboyBob]

Wiz,

I have some needles in sizes#2,3 & 4 @ a good price.

Let me know if you need any.

Thanks,

Bob Kovar

[Wizcrafts]

Wiz,

I have some needles in sizes#2,3 & 4 @ a good price.

Let me know if you need any.

Thanks,

Bob Kovar

Bob;

I'll take a pack of each size.

Now, does anybody have awls 1/2 or 1 size larger than these needles? (Sizes 3, 4, 5)

Edited January 26, 2010 by Wizcrafts

[Wizcrafts]

I am having difficulty finding #1 1/2 needles and #4.5 or #5 awls for my Union Lockstitch machine.

I still need replacement pressor feet, any type (including a standard foot), and raised throat plates for shaped holsters and cases.